Finisher Or Stacker Tamper Drive Motor Assembly Removal - Lexmark X792 Service Manual

Finisher or stacker tamper drive motor assembly removal

See"Finisher assembly (continued)" on page 7-34
Note: The left tamper motor controls the front tamper, and the right tamper motor controls the rear tamper.
1.
Remove the option from the printer.
2.
Remove the top cover. See
3.
From the controller card, disconnect the cable for the motor you are removing: left motor (A); right motor
(B).
4.
Disconnect the cable wrapped around the motor cables (C) to free the motor cable.
for the part number.
"Finisher or stacker top cover removal" on page
7562
4-333.
4-331
Repair information