Lexmark X792 Service Manual page 714

7562
Cable location table
P/N item number
40X7171 10J0974
10J1370
40X7189 10J4303
40X7199 10J0963
10J0971
10J4302
10J4308
17X0054
40X7199
7-46
Service Manual
Description Location
Weather On LVPS
station
• System board connector:
compensation
JCCT2
thermistor
Fuser thermal Behind fuser
guide
assembly
Cave Connects to bin-full sensor and
light/Output to cave light cable under
bin cable scanner left side front cover
• System board connector:
JTCVR1
Front host OP panel housing to UICC
USB cable card
Panel USB Under flatbed scanner
Hub - H cable assembly
• System board connector:
JFMUSB
AIO cavelight Connects to the OP panel
cable housing and to cable 10J4303
under the scanner left side
covers.
24-pin UICC Under flatbed scanner
cable assembly
• System board connector:
J1
30-pin UICC OP panel UICC card to display
LCD cable
ADF beacon On the bottom of the ADF
LED cable document tray
To access
See step 5 of"Low-voltage power
supply (LVPS) removal" on
page 4-74.
See "Fuser thermistor removal"
on page 4-59.
1. Disconnect the cable from the bin
full sensor. See "Bin-full sensor
removal" on page 4-32.
2. Disconnect the cable from under
the scanner left side covers. See
"Scanner left side front cover
removal" on page 4-193
"Scanner left side rear cover
removal" on page 4-193.
"Front USB cable removal" on
page 4-52
"OP panel cables removal" on
page 4-101
"ADF beacon cable removal" on
page 4-152
and