Lexmark 6500e User Manual
  1. Manuals
  2. Brands
  3. Lexmark Manuals
  4. Computer Hardware
  5. 6500E
  6. User manual
Lexmark 6500e User Manual

Lexmark 6500e User Manual

Ipds emulation
Hide thumbs Also See for 6500e:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Driver Manual, User Manual

Card for IPDS

IPDS Emulation

User's Guide
Printers
• Lexmark C792
• Lexmark C925
• Lexmark C950
Multifunction Products
• Lexmark X792
• Lexmark X925
• Lexmark X548
• Lexmark X950, X952, X954
• Lexmark 6500e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6500e and is the answer not in the manual?

Questions and answers

Related Manuals for Lexmark 6500e

Summary of Contents for Lexmark 6500e

  • Page 1: Card For Ipds

    Card for IPDS IPDS Emulation User’s Guide Printers Multifunction Products • Lexmark C792 • Lexmark X792 • Lexmark C925 • Lexmark X925 • Lexmark C950 • Lexmark X548 • Lexmark X950, X952, X954 • Lexmark 6500e...

  • Page 2: Notice

    BCOCA are trademarks or registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both. Lexmark and Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc. registered in the United States and/or other countries.

  • Page 3: Table Of Contents

    Table of Contents Card for IPDS ............................1 Notice……………………………………..……………………............2 Trademarks and Credits ........................2 Table of Contents ..........................3 Introduction ..........................7 About This Guide ........................7 Equipment Requirements and Specifications for IPDS Emulation Printing ....... 7 Customer Support ........................8 Conventions Used in the Manual ....................
  • Page 4 3.3.20 IPDS Version ......................... 23 COLOR MENU – Options Descriptions ................... 24 3.4.1 Color Management ........................ 24 3.4.2 User CMYK Profile ........................ 24 3.4.3 User RGB Profile ........................24 3.4.4 User Dest. Profile ........................25 3.4.5 RGB Grey to K ........................25 3.4.6 Preserve Black ........................
  • Page 5 5.4.2 Hole Punch to an Output Bin ....................64 Color Management – User Files ..................... 65 Types of User Files: ........................65 Managing User Color files ......................66 6.2.1 Uploading a User Color file to the Printer ................66 6.2.2 Delete a User File ........................
  • Page 6 B.1.2 Latin 2/ROECE, Latin 3, Latin 4, Latin 5 ................87 B.1.3 Cyrillic and Greek ........................88 B.1.4 Arabic and Hebrew ........................ 88 B.1.5 Japanese (non-Latin) ......................88 B.2 About the Three Types of Supported Font Sets ................ 88 B.3 Compatibility Font Sets......................89 B.3.1 4028 Compatibility Font Set - (Resident Emulation) .............

  • Page 7: Introduction

    This manual applies to the following printers: • Lexmark C792 • Lexmark C925 • Lexmark C950 This manual applies to the following Multifunction Products (MFPs): • Lexmark X792 • Lexmark X925 • Lexmark X548 • Lexmark X950, X952, X954 • Lexmark 6500e...

  • Page 8: Customer Support

    IPDS, IPDS Printer and Host Setup Guide. If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site at http://support.lexmark.com/index?page=localeSelect&locale=en&jumppage=home.

  • Page 9: Conventions Used In The Manual

    1.4 Conventions Used in the Manual • Printer menu keys and operator panel texts are written in bold. • • Option names usually correspond to menu texts and are bold when used in sentences or shown as the first column on a table listing options and general descriptions of the listed options. •...

  • Page 10: Using The Control Panel For Ipds Menu Setup

    These publications may be found at: http://support.lexmark.com 2.1 IPDS MENU Setup Options vs. Printer Setup Options Changes to the option settings under the IPDS MENU will only affect the way IPDS jobs print. These changes will not affect PostScript...
  • Page 11 3. Scroll down if necessary, then touch Reports. 4. Scroll down if necessary, then touch Menu Settings Page. 5. The message Printing Menu Settings Page is displayed. 6. The printer returns to Ready state after the list of current active settings prints.

  • Page 12: Setup Operations Reference

    3 Setup Operations Reference 3.1 IPDS MENU - Map of All Options This section describes the menu structure for the IPDS emulation. Settings are displayed on the printer under the sub-menus reached from the IPDS MENU, located under the Option Card Menu. IPDS MENU EMULATION...

  • Page 13: Ipds Menu - Default Values Overview

    3.2 IPDS MENU – Default Values Overview If you are viewing this in Acrobat Reader, you can click the Option Name to link to the detailed description of the option. 3.2.1 Emulation Option name Default Value IPDS Emulation Resident Host Resolution Auto Color Processing Black (Default for Mono printers)

  • Page 14: Map Input Trays

    Option name Default Value Default Value Default Value Narrow Format Wide Format Banner Print* OTHER ENV SIZE, Envelope Width 2550 3510 * Some models are capable of printing paper lengths up to 22.75 inches. An optional special media tray may be required to print this size media.

  • Page 15: Emulation - Options Descriptions

    3.3 EMULATION – Options Descriptions In the following an asterisk “*” indicates the default factory value. The selected value for each of these options can be printed; see Printing the Menu Settings Page on page 10. 3.3.1 IPDS Emulation This option selects the printer emulation to be used when processing IPDS data. It is important to select the correct emulation before receiving IPDS data.

  • Page 16: Color Processing

    3.3.3 Color Processing Specifies how color commands associated with the following page elements are processed: • Text (PTOCA) • Bar codes (BCOCA) • Images (IM and IOCA except FS45) • Graphics (GOCA) See section 11.5, on page 82, for more information on color command processing. Print in full color.

  • Page 17: Default Codepage

    3.3.5.2 Bar Code Size This option controls the size of the bar code when using the Resident IPDS emulation. When the 3812/3816 emulation is selected, this setting is ignored. Bar codes will be printed in a size that closely matches the IBM 3812/3816 family of printers. Prints the bar code in a size that gives best quality on this printer.

  • Page 18: Codepage Version

    3.3.7 Codepage Version This option determines which version of a code page is used. Some of the code pages are available in two versions. Some characters differ between the two versions of the same code page. If characters print differently than those entered on the keyboard, check the code page version. Version 1* Use version 1 of appropriate code pages.

  • Page 19: Exception Control

    Note: The Lexmark C792, Lexmark X792 and Lexmark 6500e printers can physically print edge to edge. The job is formatted for a page using a printable area of edge to edge. When the...

  • Page 20: Font Control

    3.3.12 Font Control This option defines how strict the reporting will be if a selected font does not correspond to a valid combination of code page and character set. Relaxed* The printer makes an intelligent decision concerning whether the selected combination of code page and character set is adequately supported.

  • Page 21: Intervention Required

    Additional memory above the total recommended may be required when receiving TrueType fonts, DBCS fonts, complex mono or color IPDS jobs. See page 115 for information on the minimum total recommended memory for each resolution setting. 3.3.15 Intervention Required This option defines if the emulation should report Intervention Required messages to the host. Types of Intervention Required messages include a paper jam, paper out, cover open or offline message.

  • Page 22: Fax Interrupt

    5 minutes Host Timer/Timeout Values and Actions: 10 minutes A printer IPDS Timeout value, should only be used if the host timer/timeout value is set to an infinite or a large value that prevents the host from disconnecting and subsequently prevents the printer from printing jobs from other ports.

  • Page 23: Print Resource List

    3.3.18 Print Resource List This option prints a list of the following IPDS resources: • All resident fonts • All captured bitmap, Type 1 and TrueType fonts • All captured DBCS fonts • All captured Code Pages • All captured data objects •...

  • Page 24: Color Menu - Options Descriptions

    3.4 COLOR MENU – Options Descriptions In the following an asterisk “*” indicates the default factory value. The selected value for each of these options can be printed; see Printing the Menu Settings Page on page 10. 3.4.1 Color Management This option allows disabling of all Color Management (including CMOCA).

  • Page 25: User Dest. Profile

    3.4.4 User Dest. Profile This option controls whether a user uploaded destination profile should be used. The device output color space is defined as CMYK or Grey. Use* If no destination profile is found applicable in the IPDS data the User Destination Profile will be used.

  • Page 26: Hl Mapping Table

    Do not use the embedded profile in the IPDS objects. Ignore 3.4.9 HL Mapping Table This option controls IPDS highlight color processing priority. IPDS CMT, User HL, IPDS HL * The IPDS Color Mapping Table (CMT) is searched first (if one exists).

  • Page 27: Def Rend Intent

    mapping table is used. Def OCA Only the default OCA Color mapping table is used. The OCA color values are converted to SMPTE-C RGB values IPDS Spec according to the IPDS specification. Refer to section 6 Color Management – User Files on page 65 for more information on uploading user files.

  • Page 28: Remove User Files

    Refer to section 6 Color Management – User Files on page 65 for more information on uploading user files. Note: CMOCA feature is available on the following printers: Lexmark C950, Lexmark X950, X952, X954, and Lexmark X548. Note: CMOCA feature is available on the EC1.1 (and above) firmware releases of the following printers: Lexmark C792, Lexmark C925, Lexmark X792, and Lexmark X925.

  • Page 29: Paper Handling Menu - Option Descriptions

    Paper Length 900 to 6824 Lexmark X952 UNIVERSAL SIZE > 3510* Lexmark X954 Paper Width 900 to 3510 Lexmark X548 UNIVERSAL SIZE > 4200* Lexmark 6500e Paper Length 900 to 4251 UNIVERSAL SIZE > 2550* Paper Width 900 to 2550...
  • Page 30 Note: Paper length on the Lexmark C792 and Lexmark X792 is limited to a maximum of 4200 when the Horizontal Transport Unit (HTU) is installed. Note: The printer paper trays and feeders are limited to feeding of specific media sizes. Refer to your printer documentation when loading a non-standard media size to determine if that media size can be fed from that tray or feeder.

  • Page 31: Other Env Size

    OTHER ENV SIZE 4200* Specifies Other Envelope Lexmark X792 > Envelope Length 1500 to 4200 dimensions. Lexmark X548 See notes below. Lexmark 6500e OTHER ENV SIZE 2550* > Envelope Width 825 to 2550 Lexmark C925 OTHER ENV SIZE 5100* Lexmark C950 >...
  • Page 32 Lexmark C925 Leading Edge Lexmark X792 of Envelope Lexmark X925 Lexmark X548 x = Left Margin y = Top Margin Lexmark 6500e Feed Direction Leading Edge of Envelope x = Left Margin y = Top Margin Lexmark C950 Lexmark X950...

  • Page 33: Map Input Trays Menu Options

    3.6 MAP INPUT TRAYS Menu Options This option defines the mapping of the host's request for a physical feeder or input tray in the printer. Any host input source can be mapped to any printer input source. The printer input source is mapped to an IPDS host number.
  • Page 34 Important: For MAP INPUT TRAYS to work correctly, the Paper Size/Type for each printer input tray must be set differently in the printer’s Paper Menu. See example 1 below. The only time you set the PAPER TYPE the same for more than one input tray is when you want to link the input trays involved.
  • Page 35 Example 3 - Understanding what happens when an IPDS tray selection number is mapped twice If an IPDS tray selection number is mapped (used) twice, the lowest tray mapping number is activated (if available). For example if Tray Mapping 6 and 7 both map to IPDS 64 as shown below, the printer will select media from the Env Feeder.

  • Page 36: Map Output Bins Menu Options

    3.7 MAP OUTPUT BINS Menu Options This option defines the mapping of the host's request for a physical output bin in the printer. The printer physical bin is mapped to an IPDS output bin selection number that is specified in the IPDS data stream. Printer output bins include the top of the printer (standard bin) and optional output bins that attach to the printer.

  • Page 37: Descriptions Of Ipds Bin Selection Numbers

    Output Bin 1 – Output Bin 10 – Selects additional standard output bins available on the printer or optional physical output bins when installed. Fin High Cap – Selects the optional finisher output bin with the highest capacity. The order of option installation does not affect the physical bin associated with the Fin High Cap bin value.

  • Page 38: Margins Menu Options

    3.8 MARGINS Menu Options Use margin settings to adjust the position of the page image. Margin settings, which could be compared to movements of the tractor feeder and paper knob of a matrix printer, affect all IPDS jobs and are not affected by IPDS commands in the job.
  • Page 39 Example 1 – Margins The ALL INPUT TRAYS Left Margin is set to the default of 0. The TRAY 1 ADJUST Left Margin is set to +25. This adjusts the page image left margin for all pages printed from tray 1 by 25/300ths of an inch to the right of the margin specified in the IPDS job.

  • Page 40: All Input Trays

    Margin menu option Top Margin Left Left Margin Margin Margin Back Back ALL INPUT TRAYS TRAY 1 ADJUST TRAY 2 ADJUST TRAY 3 ADJUST TRAY 4 ADJUST TRAY 5 ADJUST MP FEEDER ADJUST MANUAL PAPER ADJ MANUAL ENV ADJ Margin menu options will only appear when the printer option is installed or when the printer supports feeding the media.

  • Page 41: Tray 3 Adjust

    TRAY 2 ADJUST Value Function Performed Left Margin Adjusts the page front side left margin for pages -127 to 127 printed from tray 2. Top Margin Adjusts the page front side top margin for pages -127 to 127 printed from tray 2. Left Margin Back Adjusts the duplex page back side left margin for -127 to 127...

  • Page 42: Tray 5 Adjust

    3.8.6 TRAY 5 ADJUST This menu option allows additional adjustment to the top and left margins for simplex and duplex pages printed from tray 5. TRAY 5 ADJUST margin settings adjust the value of the ALL INPUT TRAYS corresponding margin setting for all pages printed from tray 5. See margin settings examples under MARGINS Menu Options on page 38 for additional information.

  • Page 43: Manual Paper Adj

    3.8.8 MANUAL PAPER ADJ This menu option allows additional adjustment to the top and left margins for simplex and duplex pages printed from the manual tray. MANUAL PAPER ADJ margin settings adjust the value of the ALL INPUT TRAYS corresponding margin setting for all pages printed from the manual tray. MANUAL PAPER Value Function Performed...

  • Page 44: Resource Capture Menu Options

    3.9 RESOURCE CAPTURE Menu Options The RESOURCE CAPTURE menu only displays if a user flash memory or a disk is installed in the printer. In the following an asterisk “*” indicates the default factory value. The selected value for each of these options can be printed;...

  • Page 45: Capture Fonts

    3.9.2 Capture Fonts This option selects whether or not to capture Fonts from the data stream. Note that the storage media for capturing the fonts is selected in the Storage Media menu. Disable* No Fonts will be captured. Fonts already captured remain in the printer. Enable Fonts will be captured.
  • Page 46 fonts, data objects and CMR objects on the flash will not be removed. Only fonts on flash will be removed. Data objects and CMR objects on flash and Fonts on Flash* data objects, CMR objects and fonts on disk will not be removed. Factory default value when a user flash is installed without a disk.

  • Page 47: Duplex Printing Using Preprinted Media

    4 Duplex Printing Using Preprinted Media The IPDS emulation uses the value selected in the printer’s Paper Menu under Paper Loading to determine how paper is loaded. For each media type, you can select Duplex or Off. If you have set the value in the printer menu to Duplex and have loaded preprinted media (such as letterhead) correctly for duplex printing, any IPDS job received from the host, whether duplex or simplex, will print correctly on the paper.

  • Page 48: Finishing Support

    Offset Stacking Stapling Staple Maximum Center Saddle Support Punch position Staple Fold** Staple** Packet Size* Lexmark C792 Optional Finisher Optional Single 50 Sheets Lexmark X792 Physical Bin 2 Finisher (Top Physical Left) Bin 2 Lexmark C925 Lexmark X925 Lexmark X548...
  • Page 49 “–“ Indicates not supported.

  • Page 50: Offset Stacking

    Lexmark X952 (Use 2 for Exit Tray 2) (Use Bin 1 for Exit Tray 2) Lexmark X954 Lexmark 6500e Output Bin 1 (Use 3 if the optional finisher is (Use Output Bin 2 if the optional installed on top of an output...

  • Page 51: Mainframe Offset Stacking

    The following examples assume that offset stacking is supported in Output Bin Value Y as specified in the above table. • Change the host output bin selection number to X in the default printer file using the CHGPRTF command. (Assumes printer default bin mappings.) •...
  • Page 52 Y, which supports offset stacking. See MAP OUTPUT BINS Menu Options on page 36 for details on bin mapping.

  • Page 53: Stapling

    5.2 Stapling Stapling is available when an optional finisher is installed. When stapling is specified in the IPDS job, the job bin selection will be ignored and the job will be routed to a bin that supports stapling. Jobs are stapled according to the following printer and finisher restrictions. It is the user's responsibility to load a media type and size that can be stapled by the optional finisher.
  • Page 54 *IPDS Output bin For Lexmark C792 and Lexmark X792 use 2. For Lexmark 6500e use 2 if only optional finisher is installed. For Lexmark 6500e use 3 if optional finisher is installed on top of output expander. Corner staple *DEVD *TOPLEFT The *DEVD staple position is the top left.
  • Page 55 Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to all paper sizes. See Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions (on page 58). For information of additional functions supported.
  • Page 56 5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples) Parameters in the printer file Edge Stitch Reference edge...*LEFT, *TOP or *DEVD Reference edge offset..*DEVD Number of staples..*DEVD or 2 Staple offsets...*DEVD Two staples are placed on the left or top reference edge of the paper. * TOP must only be used with short edge fed paper.
  • Page 57 5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples) Double Dual staple (IPDS Edge stitch with four staples) may be controlled by the Edge stitch parameters in the Printer File. Four staples are placed on the long edge of the paper. Double Dual staple is only supported on Letter and A4 when the paper is loaded for Long Edge Fed (LEF) printing.
  • Page 58 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions The Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 support a Standard Finisher and an Advanced Finisher. The Advanced Finisher supports Corner staple, Dual staple (IPDS Edge stitch with 2 staples), Double Dual staple (IPDS Edge stitch with 4 staples), Center Fold (IPDS Center Fold-in), and Saddle staple (IPDS Saddle stitch-in).
  • Page 59 Staple offsets...*DEVD Reference edge: *LEFT or *DEVD – NACKs may be generated for other parameters. Reference edge offset: *DEVD – All other values are ignored. Number of staples: *DEVD – Two staples Integer – All integer values result in two staples. Staple Offsets: *DEVD –...

  • Page 60: Mainframe Stapling

    5.3.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher The optional finisher supports only one staple position. You can not physically change the position of the staple. The printer automatically rotates text before stapling when the finisher is installed.
  • Page 61 Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to all paper sizes. See Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions (on page 58). For information of additional functions supported.
  • Page 62 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions The Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 support a Standard Finisher and an Advanced Finisher. The Advanced Finisher supports Corner staple, Dual staple (IPDS Edge stitch with 2 staples), Double Dual staple (IPDS Edge stitch with 4 staples), Center Fold (IPDS Center Fold-in), and Saddle staple (IPDS Saddle stitch-in).

  • Page 63: Hole Punch

    5.4 Hole Punch Hole punching of IPDS jobs is available when an optional output bin with hole punch capability is installed. See the table on page 48 to determine if your finisher supports hole punching. A job may select hole punch by specifying it in an IPDS command. When hole punch is selected through an IPDS data stream command, hole punch will override output bin selection and the job will be routed to a bin that supports hole punch.

  • Page 64: Hole Punch To An Output Bin

    Tray Mapping 8 to Tray 1 Hp to IPDS Number 4. (When IPDS Number 4 is the requested source in the IPDS data stream, pages are pulled from the printer physical Tray 1 and all pages are hole punched.) 5.4.2 Hole Punch to an Output Bin Hole punching may be performed on paper routed to most output bins which support hole punch.

  • Page 65: Color Management - User Files

    6 Color Management – User Files Color printers support a set of user files that can be loaded to a persistent storage media in the printer and affect the color processing depending on the setting of the color options described in section 3.4 COLOR MENU –...

  • Page 66: Managing User Color Files

    Index values can be from 1 to 16. ccc,mm,yyy and kkk values can be from 0 to 255. Separators can be spaces or “,”. The values must be decimal values. # indicates a comment line. It is recommended to add a comment line in the start of the file with a description of this mapping file.

  • Page 67: Delete A User File

    4. Select the type of file to upload from the drop down list and browse the file on your local machine. 5. Select Submit to save the file to a persistent storage media in the printer. Note: The file will be validated before storing. If the contents of the file does not match the criteria for the file type, the file will be ignored, and you will receive an error in the browser.

  • Page 68: Ipds Job Cancel

    7 IPDS Job Cancel 7.1 Canceling IPDS Jobs IPDS jobs may be cancelled using the normal cancel sequence for the printer. Cancel Job while an IPDS job is being processed causes an “IPDS cancel exception” to be sent to the host.

  • Page 69: Working With Captured Resources

    8 Working with Captured Resources 8.1 Capture Resource and Remove Resources Capture is a function whereby downloaded resources can be stored on disk or user flash. The flash memory and hard disk may be printer optional storage media ordered separately from the printer. Menu path: Option Card Menu >...

  • Page 70: Capturing Fonts From An As/400 Or Iseries

    8.2.1 Capturing Fonts from an AS/400 or iSeries 8.2.1.1 Enabling Font Capture on the Printer Follow the steps below to enable font capture on the printer. For details refer to RESOURCE CAPTURE Menu Options on page 44): 1. Select the storage media: Option Card Menu > IPDS MENU > RESOURCE CAPTURE > Capture Media.

  • Page 71: Capturing Fonts From A Mainframe Host

    8.2.2 Capturing Fonts from a Mainframe Host 8.2.2.1 Enabling Font Capture on the Printer Follow the steps below to enable font capture on the printer. For details refer to RESOURCE CAPTURE Menu Options on page 44): 1. Select the storage media: Option Card Menu > IPDS MENU > RESOURCE CAPTURE > Capture Media.
  • Page 72 STEP 1. DISPLAY CURRENT FONT MARKING STATUS To determine the marking status of your host fonts you can run the APSRMARK report utility. The following is a sample of the JCL to run the font report listing. Sample JCL to run font report listing to determine current font marking status: //APSHORT CLASS=A, MSGCLASS=A,...
  • Page 73 //STEP1 EXEC PGM=APSRMARK //SYSPRINT DD SYSOUT=J //IN1 DD UNIT=3390,DSN=SYS1.FONT300,DISP=SHR,VOL=SER=OS3R7A //OUT1 DD UNIT=3390,DSN=SYS1.FONTNEW,DISP=SHR,VOL=SER=OS3R7A //SYSIN DD * INDD=IN1,OUTDD=OUT1,MEMBER=T1V10037,PUBLIC INDD=IN1,OUTDD=OUT1,MEMBER=C08400B0,PUBLIC Note: If you want to mark all fonts in a particular font library "PUBLIC" you can create a new font library, copy, and mark all fonts as "PUBLIC" at the same time. The following is a sample of the JCL commands to copy and mark all fonts "PUBLIC"...

  • Page 74: Preparing Data Objects (Non-Font Resources) For Capture

    To select font capture from in-stream JCL add the "CHARS" option to sysout/output statement as follows. //OUT1 OUTPUT CLASS=A, DEST=LOCAL,FORMDEF=A10110,PAGEDEF=A06462,CHARS=88FB To print a list of the captured fonts, select Print Resource List from Option Card Menu > IPDS MENU > EMULATION (see page 23). 8.2.2.4 Making TrueType Fonts eligible for Capture on mainframe The Font Installer for AFP Systems can mark TrueType fonts as eligible for capture.
  • Page 75 Resource Installer, check the box which installs the resources as eligible for capture. Other applications may also allow resources to be marked eligible for capture.

  • Page 76: Remote Configuration Of Printer Ipds Settings

    9 Remote Configuration of Printer IPDS Settings 9.1 Why Use a Browser Most IPDS emulation settings stored in the printer (the default IPDS settings) can be changed remotely using a browser. This method of changing settings is especially useful during printer installation to set all of the IPDS options to the values recommended by your system administrator.

  • Page 77: Functions That Can Not Be Operated Remotely

    Beside the Submit button you will see a Reset Form button. If you have entered values in the page without submitting, and decide to start all over again, click Reset Form. The page will then display the values that were current when you opened the IPDS Configuration page. 9.3 Functions that Can Not be Operated Remotely The following IPDS functions can not be operated remotely: •...

  • Page 78: Printer Messages And Problems

    10 Printer Messages and Problems Please refer to the IPDS Printer and Host Setup Guide for information on various problems and solutions.

  • Page 79: Command Reference

    11 Command Reference 11.1 XOA Print Quality Control The Execute Order Any State (XOA) Print Quality Control command specifies the print quality at which jobs will be printed. Specifying lower print quality levels can save toner. The following table gives the Quality Level value range.

  • Page 80: Xoh Opc Product Identifier Self Defining Field

    X’F0F0F7F5F2F5’ 007525 Lexmark X548 X’F0F0F7F5F6F2’ 007562 Lexmark X792 X’F0F0F7F5F4F1’ 007541 Lexmark X925 X’F0F0F7F5F5F8’ 007558 Lexmark X950, X952, X954 X’F0F0F4F0F3F6’ 004036 Lexmark 6500e Product Identifier Self Defining Field Values: Bytes 13-63 Special Data Area Value Description Bytes 13-15 X’404040’ Model Number...

  • Page 81: Finishing Operations Self-Defining Field

    X'D385A79481999240E7F9F5F4' Lexmark X954 X'D385A79481999240F6F5F0F085' Lexmark 6500e 11.3 Finishing Operations Self-Defining Field Finishing operations are supported when an optional finisher is installed and the functions are supported by the finisher. Finishing operations are reported in the Finishing Operations Self-Defining Field. The values below are reported to the host when the finishing function is supported by the finisher.

  • Page 82: N-Up Printing

    11.4 N-up Printing N-up print support allows multiple pages to be printed on a single sheet. N-up allows 1-4 partitions to be defined per side of a sheet of paper. This allows up to 8 pages to be printed per sheet. Default page placement (N-up) and explicit page placement (N-up EPP) are supported.

  • Page 83: Media Reporting By Object Id (Oid)

    11.8 Media Reporting by Object ID (OID) Media names identified as media IDs are returned to the host for each printer paper source. This information is reported in Bytes 24-36 of the Execute Order Home State (XOH) Obtain Printer Characteristics (OPC) Printable Area Self Defining Field (SDF). The tables below define the values reported to the host.
  • Page 84 Media Name Media Type Media type OID Note (Note 1) (Value for ‘bb’ or ‘bbbb’ in table above) ISO A5 CO ISO A5 colored X’15’ ISO B5 ENV ISO B5 envelope X’49’ JIS B4 JIS B4 (257 x 364 mm) X’2A’...

  • Page 85: Warranty

    12 Warranty The limited warranty you received with your printer gives warranty terms and conditions. For warranty information, refer to your printer documentation.

  • Page 86: Appendices

    Appendices…………………………………….. A. Technical Specifications IPDS Feature Overview The IPDS emulation supports a rich set of features and functions. Support is only available for some of the features and functions listed when optional hardware features are installed on the printer. Check your printer specification for feature and optional hardware support.

  • Page 87: Font And Code

    B. Font and Code Page Information International Language Definitions The IPDS emulation supports a variety of languages. Note that quite a few languages are supported by a number of different code pages. B.1.1 Latin 1 Afrikaans Belgian (French and Dutch) Brazilian Portuguese Canadian English Canadian French...

  • Page 88: Cyrillic And Greek

    B.1.3 Cyrillic and Greek Cyrillic / Cyrillic Multilingual Bulgarian Byelorussian Macedonian Russian Serbo-Croatian Ukrainian Greek Greek For a detailed list of supported IPDS “Core Interchange” Font Set Code Pages, see Appendix B.5.6 Cyrillic and Greek Code Pages on page 96. B.1.4 Arabic and Hebrew For a detailed list of supported IPDS “Core Interchange”...

  • Page 89: Compatibility Font Sets

    Compatibility Font Sets B.3.1 4028 Compatibility Font Set - (Resident Emulation) The fonts included below are used by the Resident emulation. For some of these fonts the IPDS emulation will use an equivalent scalable font. Most of these fonts support the Latin 1 languages. Typeface FGID Width...
  • Page 90 G3 = All code pages in group G2 plus code pages (CPGIDs) 437 and 850. See descriptions under Special Code Pages below. In addition to the above set of fonts, a number of other FGIDs are also recognized by the IPDS printer emulation.

  • Page 91: 3812/3816 Compatibility Font Set

    B.3.2 3812/3816 Compatibility Font Set When the 3812/3816 emulation is selected, these fonts replace the Resident font set. For some of these fonts the IPDS emulation will use an equivalent scalable font. Most of these fonts support the Latin 1 languages.
  • Page 92 In addition to the above set of fonts a number of other FGIDs are also recognized by the IPDS. These are simulated by substitution with one of the above fonts or by bolding one of the above fonts. Special Code Pages The following special code pages are supported when the 3812/3816 emulation is selected.

  • Page 93: Ibm Core Interchange Scalable Font Set

    IBM Core Interchange Scalable Font Set The typefaces defined for the IBM Core Interchange Set font provide support for the following groups of languages and are supported in the printer: Latin 1 including DCF, Latin 2, Latin 3, Latin 4 (including Baltic), Latin 5, Cyrillic, Greek, and Symbols.

  • Page 94: Ibm Core Interchange Font Set Code Page Support

    IBM Core Interchange Font Set Code Page Support The code pages supported by the Core Interchange Font Set are listed below. A selection of these code pages can be set as default from the front panel. See DEFAULT CODEPAGE on page 17 in the IPDS MENUS section, for a list of those code pages that can be selected. B.5.1 Latin 1 Country Extended Code Pages Latin 1 Country Extended Code Pages...

  • Page 95: Latin 1 Ebcdic Publishing Code Pages

    B.5.2 Latin 1 EBCDIC Publishing Code Pages Latin 1 EBCDIC Publishing Codepage GCSGID - Languages (and Countries) (CPGID) Belgian (Belgium) 1145 Brazilian Portuguese (Brazil) 1145 Canadian French (Canada (French)) 1145 Castilian Spanish (Spain, Philippines) 1145 Danish / Norwegian (Denmark, Norway) 1145 Finnish / Swedish (Sweden, Finland) 1145...

  • Page 96: Latin Ebcdic Dcf Code Pages

    Latin 2, 3, 4, 5, and 9 Code Pages Codepage GCSGID – Languages and/or Countries (CPGID) Latin 2 Multilingual 1110 1111 Latin 2 Multilingual – with Euro 1153 1375 Latin 2 Windows (ASCII) – with Euro 1250 1410 Latin 3 Multilingual – incl. Turkish 1286 Latin 3 Multilingual PC (ASCII) Latin 4...

  • Page 97: Arabic Code Pages

    B.5.7 Arabic Code Pages Arabic Code Pages Codepage GCSGID (CPGID) Arabic, Arabic Bilingual Arabic, Arabic Bilingual – with Euro (Arabic Eur) 1461 Arabic ISO/ASCII 8-bit 1008 1162 Arabic ISO/ASCII 8-bit – with Euro 1008 1464 Arabic Extended ISO/ASCII 8-bit – with Euro 1046 1465 Arabic PC (ASCII)

  • Page 98: Ibm Coordinated Font Set

    IBM Coordinated Font Set The IBM Coordinated Font Set is supported only in the following Code Page sets: Latin 1 Country Extended Code Pages, Latin 1 EBCDIC Publishing Code Pages, Latin 1 ASCII, and Latin EBCDIC DCF code pages. See Appendix B.4 IBM Core Interchange Scalable Font Set, on page 93 for a complete listing of fonts.

  • Page 99: Postnet Font Support

    POSTNET Font Support The IPDS Emulation supports generation of the POSTNET bar code in the IPDS Bar Code tower. In addition, the following FGID may be used to generate a POSTNET bar code. Typeface FGID POSTNET 4094 Code pages that can be used with FGID 4094 include the following. Codepage GCSGID Function / Descriptions (CPGID)

  • Page 100: Font Substitution

    Font Substitution If a font is not available, a different font is substituted using a best-fit algorithm. This substitution is based on the FGID and the font width. If any of the font IDs in the following tables are used in a document, they are mapped to the substituted font id given.

  • Page 101: 3812/3816 Emulation Font Substitution

    B.8.2 3812/3816 Emulation Font substitution Typestyle Original Substituted FGID FGID/Font Width Matrix Gothic 10 144 fw Roman Text 144 fw Serif Text 10 144 fw Serif Text 10 Italic 144 fw Prestige Pica Bold 60 or 12 b 144 fw Serif Text 12 120 fw Serif Text 12 Italic...
  • Page 102 (Bar Code Symbol Descriptor Byte 13; Bar code Data Descriptor Byte 17) Type Bar Code Type Description X’01’ Code 3 of 9, The Standard Code 3 of 9 character set and Extended Code 3 of AIM USS-39, 9 character set are supported. Also known as Code 39. (BCD1) X’01’...
  • Page 103 Type Bar Code Type Description X’09’ The first check digit is generated using the IBM-modulo-11 algorithm, the second using the IBM modulo-10 algorithm. The first check digit equals 11 minus the remainder. Exception condition EC-0E00 exists if the first check-digit calculation results in a value of 10.
  • Page 104 Type Bar Code Type Description Supplemental This option assumes that the base UPC Version A or E symbol is (Paperbacks) presented as a separate bar code object. A check digit is (BCD1) generated from the five supplemental digits and is used to assign the left-odd and left-even parity of the five-digit supplemental bar code.
  • Page 105 Type Bar Code Type Description X’0C’ Interleaved 2 of 5, The Interleaved 2 of 5 symbology requires an even number of AIM USS-I 2/5 digits. The printer will add a leading zero if necessary to meet this requirement. (BCD1) X’01’ Print the bar code without a printer generated check digit.
  • Page 106 Type Bar Code Type Description normal EAN-13 bar code symbol. The bar code object contains both the EAN-13 symbol and the two-digit supplemental symbol. The two-digit supplemental bar code is presented after the EAN-13 symbol using left hand odd and even parity as determined by the two supplemental digits chosen from number sets A and B.
  • Page 107 Type Bar Code Type Description X’1A’ RM4SCC (Royal A 4-state customer code defined by the Royal Mail Postal Mail 4-State service of England for use in bar coding postal code information. Customer Code) This symbology is also called the Royal Mail bar code or the 4- State customer code.
  • Page 108 Type Bar Code Type Description are generated by the printer. Using any characters other than those prescribed for any part of the bar code will result in a NACK. X’01’ Standard Customer Barcode (format code = 11). An 8-digit number representing the Sorting Code. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Modifiers X’02’...
  • Page 109 Type Bar Code Type Description for this bar code symbol. X’01’ X'01' A 5-digit Routing ZIP code is used to present the USPS Four-State bar code symbol. 25 numeric digits must be used as input data for this bar code; the valid values for the Routing ZIP Code are 00000–99999.

  • Page 110: Intelligent Mail Container Barcode Data Field Ranges

    Intelligent Mail Container Barcode Data Field Ranges This table refers to the Code 128 Type X’11’ modifier X’05’. Field name Source Field Size and Data type Field Range Function 1 USPS 1 byte FNCI (X’8F’) Symbol assigned Character Application USPS 2 bytes (numeric) Identifier assigned...
  • Page 111 Module Width = Module Width in mils (Bar Code Symbol Descriptor Byte 17) Code Bar Code Type Module Width Description Data Matrix Range: 0x0C-0xFE Print a Data Matrix bar code symbol using error checking and correcting algorithm 200 Default: 0x15 * as defined in the AIM International Symbology Specification –...

  • Page 112: Data Matrix Special Function Parameter Support

    Data Matrix Special Function Parameter Support These values are found in the Bar Code Symbol Data. A description of the supported values may be found in the ”Bar Code Object Content Architecture (BCOCA) Reference”. Offset Name Supported Values Byte 5 Bit 0 EBCDIC B’0’, B’1’...

  • Page 113: Maxicode Special Function Parameter Support

    MaxiCode Special Function Parameter Support These values are found in the Bar Code Symbol Data. A description of the supported values may be found in the ”Bar Code Object Content Architecture (BCOCA) Reference”. Offset Name Supported Values Byte 5 Bit 0 EBCDIC B’0’, B’1’...

  • Page 114: Printing Dbcs Characters

    Byte 12 Bit 0 UCC/EAN FNC1: If this flag is B'1', this QR Code symbol will indicate that it conforms to the UCC/EAN application identifiers standard. Byte 12 Bit 1 must be B'0'. Byte 12 Bit 1 Industry FNC1 If this flag is B'1', this QR Code symbol will indicate that it conforms to the specific industry or application specifications previously agreed with AIM International.

  • Page 115: Memory Requirements And Recommendations

    1200 Image Q Duplex and saving IPDS resources 512MB 1200 Image Q DBCS, TrueType, Complex Jobs 1200 Image Q CMOCA Jobs Lexmark C950 (standard 1024 MB): IPDS Print Resolution Job Attributes Recommended optional memory 2400 Image Q Simplex/Duplex 2400 Image Q...
  • Page 116 1200 Image Q Duplex and saving IPDS resources 512MB 1200 Image Q DBCS, TrueType, Complex Jobs Lexmark X950, X952, X954 (standard 1024 MB for X950/2, 2048 for X954): IPDS Print Resolution Job Attributes Recommended optional memory (X950/2 only) 2400 Image Q...
  • Page 117 1200 dpi Duplex and saving IPDS resources 512MB 1200 dpi DBCS, TrueType, Complex Jobs 1200 dpi CMOCA Jobs Lexmark 6500e (standard 256 MB): IPDS Print Job Attributes Recommended Optional Memory Resolution 600 dpi/1200 Image Q Simplex/Duplex 600 dpi/1200 Image Q...

  • Page 118: Index

    Index ….. ………………………………… barcodes ....See bar code. Unless otherwise specified, the term bar code refers to 1-D bar 1-D barcodes ........See bar code code. BCOCA Bar Code Object Content Architecture 2 of 5 - codabar (bar code) ......105 Reference .........
  • Page 119 supported by the IBM Core Interchange Font control panel ..See operator panel (printers) or Set ............. 94 touch screen (MFPs) version ............18 Coordinated Font Set ........98 codepage ........ See also code page Coordinated Font Set ........88 Codepage Version (IPDS MENU >...
  • Page 120 Font Style Set ..........20 Core Interchanges Fonts ....... 94 Host Resolution ..........15 double byte character sets (DBCS ....114 Intervention Required ........21 font style set ..........20 IPDS Emulation ..........15 IPDS print resolution ........20 IPDS Print Res ..........20 OCR fonts .............
  • Page 121 default bin mapping ........37 ALL INPUT TRAYS ........40 IPDS Emulation (IPDS MENU > MANUAL ENV ADJ ........43 EMULATION) ..........15 MANUAL PAPER ADJ ....... 43 guidelines for choosing settings ....15 MP FEEDER ADJUST ........ 42 IPDS Job Cancel ..........68 option overview and explanations ....
  • Page 122 PCL print jobs ..........10 Remove Resources function ......45 PDF417 (2-D bar code) ......111, 113 Remove User Files (IPDS MENU > Color physical page VPA ........... 18 Management>Remove User Files) ....28 PLANET (bar code) ........106 RESOURCE CAPTURE Menu port 5001 ............
  • Page 123 tray mapping (IPDS MENU > MAP INPUT Universal Product Code, US, and Candian TRAYS MENU) ........... 33 Grocer Product Code (bar code) ..... 101 tray mapping number ........33 User files- Color Management ......65 TRAY n ADJUST (IPDS MENU > MARGINS) USPS (bar code ..........

This manual is also suitable for:

C925C950X548X792X925X950 ... Show all

Table of Contents