Mpf Pick Rolls And Special Wear Strip Removal - Lexmark X792 Service Manual

7562

MPF pick rolls and special wear strip removal

See "Left and rear covers" on page 7-5
Always replace both pick rolls and the special wear strip at the same time.
1.
Open the left access door.
2.
Remove the rubber rolls (A) from the hubs. The hubs stay on the printer.
3.
Insert a flat-blade screwdriver behind the top of the special wear strip, and then twist the screwdriver to pop
out the strip.
4-92
Service Manual
for the part number.
A