7562
Staging paper path reference edge assembly removal
See
"Front" on page 7-7
1.
Remove the rear cover. See
2.
Remove the left cover. See
3.
Remove the paper pick mechanism. See
4.
Remove the fuser. See
5.
Remove the ITU assembly. See
6.
Push the top of the deflector assembly down and rotate it back to release the upper hooks.
7.
Set the deflector assembly out of the way as far as the sensor cables will allow.
4-128
Service Manual
for the part number.
"Rear cover removal" on page
"Left cover removal" on page
"Paper pick mechanism assembly removal" on page
"Fuser assembly removal" on page
"ITU assembly removal" on page
4-21.
4-15.
4-53.
4-65.
4-108.