Sensor (MPF media out) removal
1.
Remove the MPF rear cover. See
2.
Remove the MPF feed unit assembly. See
3.
Remove the two hooks securing the upper frame (A) to the MPF feed unit assembly.
4.
Remove the upper frame (A) by moving it up and out in the direction of the arrow.
5.
Disconnect the connector from the sensor (MPF media out) (B).
6.
Release the hooks securing the sensor (MPF media out) (B) in the upper frame (A).
7.
Remove the sensor (MPF media out) (B).
Hook
Right
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
A
Connector
B
4-55.
Hook
(Upper frame)
Slot
Repair information
4024-110
Previous
4-51.
Next
Go Back
4-53