Accessing The Service Menus - Lexmark 7462 series Service Manual

Accessing the service menus

There are different test menus that can be accessed during POR to identify the problems with the printer.
•
Diagnostics menu—This group consists of menus, settings, and operations that are used to diagnose
various printer problems.
Note: While the Diagnostics menu group is active, all host interfaces are offline.
•
Configuration menu—This group consists of menus, settings, and operations that are infrequently required
by a user. Generally, the options made available in this menu group are used to configure a printer for
operation.
Accessing the Diagnostics menu
1
Turn off the printer.
2
From the operator panel, press and hold the 3 and 6 buttons simultaneously for about 10 seconds.
3
Turn on the printer.
4
Release the buttons after 10 seconds.
Accessing the Configuration menu
1
Turn off the printer.
2
From the operator panel, press and hold the 2 and 6 buttons simultaneously for about 10 seconds.
3
Turn on the printer.
4
Release the buttons after 10 seconds.
Diagnostics menu
Entering the Diagnostics menu
1
Turn off the printer.
2
From the operator panel, press and hold the 3 and 6 buttons simultaneously.
3
Turn on the printer.
4
Release the buttons after 10 seconds.
Registration
Configure this setting to make sure printouts are aligned properly.
1
From the Diagnostics menu, select REGISTRATION.
2
Print a test page. For more information, see
determine the changes you need to make to the margin settings.
"Printing a quick test page" on page
Service menus
263
7462
264. Retain this page to