Administering The Primary Controller; Enabling License Server Capability On A Media Gateway - Avaya S8500 Installing And Configuring

Administering the primary controller

You must administer the primary controller so that the controller can identify and communicate
with the S8500 LSP.
1. At the SAT command line, type change node-names ip name and press Enter,
where name is the name of the LSP.
2. In the Name column, type the name of the LSP.
3. In the IP Address column, type the IP address of the LSP.
4. At the SAT command line, type add survivable-processor name and press Enter,
where name is the LSP name from the Node Names screen.
The system displays the Survivable Processor screen.
add survivable-processor sv-mg2-lsp
5. The Type field is automatically populated with LSP. LSP appears in the field if the node
name is not associated with ESS.
6. Enter a network region for the LSP. The default is 1. However, a different network region
might be better suited for the LSP to provide media gateway and IP telephone support.
7. On pages 2 and 3 of the screen, add any adjuncts that the LSP can support if a failover
from the primary controller occurs.
For how to administer the Survivable Processor form, see Administrator Guide for Avaya
Communication Manager (03-300509).

Enabling license server capability on a media gateway

If a G250 or G350 Media Gateway provides the serial number, access the administration level
command line of the media gateway and run the command ip license-server. If a G700 Media
Gateway provides the serial number for the S8500 LSP license, skip this step and continue with
Installing and verifying the license on the new LSP
Installing and Configuring the Avaya S8500 Media Server
SURVIVABLE PROCESSOR - PROCESSOR ETHERNET
Node Name: sv-mg2-lsp
IP Address: 128.256.173.101
Type: LSP
Network Region: 1
Administering the primary controller
on page 78.
Page 1 of xx
77
June 2006