1151B1 And 1151B2 Power Supplies; Important Safety Instructions For 1151B1 And 1151B2 Power Supplies - Avaya S8700 Installation Instructions Manual

2
Connect the other end of the cable to the Ethernet port of the PC, server, router, workstation, IP
telephone, switch, or hub.
3
Check that the appropriate link (LNK) LEDs light up.

1151B1 and 1151B2 Power Supplies

The 1151B1 and 1151B2 power supplies are a local power supply. The telephones or consoles connect
directly to them through an RJ45 connector. The 1151B2 has a battery backup.
These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL 60950 third
edition.
Complies
Certified
Approved
Approved
For safety instructions, see
243. For installation instructions, see
Important safety instructions for 1151B1 and
1151B2 Power Supplies
Please read the following helpful tips. Retain these tips for later use.
When using this power supply, the following safety precautions should always be followed to reduce the
risk of fire, electric shock, and injury to persons.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on this power supply.
•
This product can be hazardous if immersed in water. To avoid the possibility of electrical shock,
do not use it near water.
•
To reduce the risk of electric shock, do not disassemble this product except to replace the battery.
•
This product should be operated only from the type of AC power source indicated on the label. If
you are not sure of the type of AC power being provided, contact a qualified service person.
•
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
•
Do not overload wall outlets and extension cords as this can result in the risk of line or electric
shock.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
NOTE:
Use a crossover cable when connecting the Avaya P333T-PWR switch to a switch or hub.
UL 60950
CSA C22.2
EN
CE Regulatory Compliance

Important safety instructions for 1151B1 and 1151B2 Power Supplies

Connecting the 1151B1 or 1151B2 Power Supplies
Installing and wiring telephone power supplies
on page
on page 244.
243