Configuration Example - H3C S5600 SERIES Operation Manual

To do...
Disconnect a Web user
by force

Configuration Example

Network requirements
Only the Web users sourced from the IP address of 10.110.100.52 are permitted to access the switch.
Network diagram
Figure 8-3 Network diagram for controlling Web users using ACLs
10.110.100.46
Host A
IP network
Host B
10.110.100.52
Configuration procedure
# Define a basic ACL.
<Sysname> system-view
[Sysname] acl number 2030
[Sysname-acl-basic-2030] rule 1 permit source 10.110.100.52 0
[Sysname-acl-basic-2030] quit
# Apply ACL 2030 to only permit the Web users sourced from the IP address of 10.110.100.52 to access
the switch.
[Sysname] ip http acl 2030
Use the command...
free web-users { all | user-id user-id |
user-name user-name }
Switch
8-9
Remarks
Required
Available in user view