Displaying And Maintaining Trill; Trill Configuration Example; Network Requirements - H3C S5830V2 Series Configuration Manual

Task
Display the route to an RB
with the specified nickname.

Displaying and maintaining TRILL

Execute the display commands in any view and the reset command in user view.
Task
Display TRILL ardency table
information.
Display brief TRILL information.
Display TRILL FIB information.
Display TRILL GR status.
Display TRILL ingress forwarding
information.
Display TRILL port information.
Display TRILL LSDB information.
Display all ingress entries in the
TRILL multicast FIB (MFIB).
Display all egress entries in the
TRILL MFIB.
Display information about the TRILL
multicast routing table.
Display the TRILL neighbor table.
Display TRILL neighbor statistics.
Display the TRILL RPF check table
information.
Display TRILL topology information.
Display information about the TRILL
unicast routing table.
Clear dynamic running statistics of
the TRILL process.

TRILL configuration example

Network requirements

As shown in
layer, and the access layer. A port connected to a higher layer device is an uplink port, and a port
connected to a lower layer device is a downlink port.
Command
tracert trill [ -f first-ttl | -i
interface-type interface-number |
-m max-ttl | -priority priority | -q
packet-number | -t timeout | -v
[ -name ] ] * nickname
Figure 9, a Layer 2 data center network has three layers: the core layer, the distribution
Command
display trill adjacent-table [ count | nickname nickname interface
interface-type interface-number ]
display trill brief
display trill fib [ count | nickname nickname ]
display trill graceful-restart status
display trill ingress-route [ vlan vlan-list ]
display trill interface [ interface-type interface-number | verbose ]
display trill lsdb [ local | lsp-id lsp-id | verbose ] *
display trill mfib ingress [ vlan vlan-id [ local-entry |
remote-entry ] ]
display trill mfib transit [ nickname nickname [ prune-entry |
rpf-entry | vlan vlan-id [ mac-address mac-address ] ] ]
display trill multicast-route [ tree-root nickname [ vlan vlan-list
[ mac mac-address ] ] ]
display trill neighbor-table
display trill peer [ interface interface-type interface-number ]
display trill rpf-table tree-root nickname
display trill topology [ verbose ]
display trill unicast-route [ nickname nickname ] [ verbose ]
reset trill
22
Remarks
Execute this command in any view.