Software Features - H3C S5600 SERIES Operation Manual

Software Features

S5600 Series Ethernet Switches have abundant software features and can meet the requirements of
different applications.
Table 3-2 Service features of the S5600 series
1 CLI
2 Login
3 Configuration File Management
4 VLAN
5 IP Address and Performance
Configuration
6 Voice VLAN
7 GVRP
8 Port Basic Configuration
9 Link Aggregation
10 Port Isolation
11 Port Security-Port Binding
12 DLDP
13 MAC Address Table
14 Auto Detect
Table 3-2 summarizes the features provided by each module.
Part Features
CLI
Hierarchically grouped commands
CLI online help
Logging into a switch through the Console port
Logging into a switch through an Ethernet port by
using Telnet or SSH
Logging into a switch through the Console port by
using modem
Logging into a switch through Web or NMS
Controlling user login using ACL
Saving, restoring, and deleting the configuration file
IEEE 802.1Q-compliant VLAN
Port-based VLAN
Protocol-based VLAN
Configuring an IP address for a switch
Configuring the TCP attributes for a switch
Enabling/disabling the switch to receive directed
broadcasts
Enabling/disabling the switch to send ICMP error
messages
Voice VLAN
GARP VLAN Registration Protocol (GVRP)
Configuring port auto-negotiation rate
Limiting traffic on a port
Setting broadcast storm suppression globally
Loopback detection supported
Cable test
Link Aggregation Control Protocol (LACP)
Port isolation group
Multiple security modes
MAC address-to-IP address-to-port binding
Device Link Detection Protocol (DLDP)
Manually configuring dynamic, static, and black
hole MAC addresses
Configuring the aging time for MAC addresses
MAC address learning limit
Auto detect
Auto detect applications in static routing, VRRP,
and VLAN interface backup
3-2