Dhcp Ip Address Assignment; Ip Address Assignment Policy; Obtaining Ip Addresses Dynamically - H3C S5600 SERIES Operation Manual

Hide thumbs Also See for S5600 SERIES:

Table of Contents

Figure 1-1 Typical DHCP application

DHCP IP Address Assignment

Currently, DHCP provides the following three IP address assignment policies to meet the requirements

of different clients:

Manual assignment. The administrator configures static IP-to-MAC bindings for some special

clients, such as a WWW server. Then the DHCP server assigns these fixed IP addresses to the

Automatic assignment. The DHCP server assigns IP addresses to DHCP clients. The IP

addresses will be occupied by the DHCP clients permanently.

Dynamic assignment. The DHCP server assigns IP addresses to DHCP clients for predetermined

period of time. In this case, a DHCP client must apply for an IP address again at the expiration of

the period. This policy applies to most clients.

A DHCP client undergoes the following four phases to dynamically obtain an IP address from a DHCP

Discover: In this phase, the DHCP client tries to find a DHCP server by broadcasting a

DHCP-DISCOVER packet.

Offer: In this phase, the DHCP server offers an IP address. After the DHCP server receives the

DHCP-DISCOVER packet from the DHCP client, it chooses an unassigned IP address from the

address pool according to the priority order of IP address assignment and then sends the IP

address and other configuration information together in a DHCP-OFFER packet to the DHCP

client. The sending mode is decided by the flag filed in the DHCP-DISCOVER packet, refer to

DHCP Packet Format

Select: In this phase, the DHCP client selects an IP address. If more than one DHCP server sends

DHCP-OFFER packets to the DHCP client, the DHCP client only accepts the DHCP-OFFER

packet that first arrives, and then broadcasts a DHCP-REQUEST packet containing the assigned

IP address carried in the DHCP-OFFER packet.

Acknowledge: In this phase, the DHCP servers acknowledge the IP address. Upon receiving the

DHCP-REQUEST packet, only the selected DHCP server returns a DHCP-ACK packet to the

DHCP client to confirm the assignment of the IP address to the client, or returns a DHCP-NAK

packet to refuse the assignment of the IP address to the client. When the client receives the

for details.

Table of Contents