Bootp Client Configuration Example; Displaying Dhcp/Bootp Client Configuration - H3C S5600 SERIES Operation Manual

BOOTP Client Configuration Example

Network requirement
Switch B's port belonging to VLAN1 is connected to the LAN. VLAN-interface 1 obtains an IP address
from the DHCP server by using BOOTP.
Network diagram
See Figure 2-1.
Configuration procedure
The following describes only the configuration on Switch B serving as a client.
# Configure VLAN-interface 1 to dynamically obtain an IP address from the DHCP server.
<SwitchB> system-view
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ip address bootp-alloc

Displaying DHCP/BOOTP Client Configuration

To do...
Display related information on a
DHCP client
Display related information on a
BOOTP client
Use the command...
display dhcp client [ verbose ]
display bootp client [ interface
Vlan-interface vlan-id ]
6-3
Remarks
Optional
Available in any
view