H3C S5600 SERIES Operation Manual page 732

Network diagram
Figure 1-10 Network diagram for VLAN mapping configuration
Configuration procedure
# Create customer VLANs VLAN 100 and VLAN 200 and service VLANs VLAN 500 and
VLAN 600 on Switch A.
<SwitchA> system-view
[SwitchA] vlan 100
[SwitchA-vlan100] quit
[SwitchA] vlan 200
[SwitchA-vlan200] quit
[SwitchA] vlan 500
[SwitchA-vlan500] quit
[SwitchA] vlan 600
[SwitchA-vlan600] quit
# Configure GigabitEthernet 1/0/11 of Switch A as a trunk port and configure its default
VLAN as VLAN 100. Assign GigabitEthernet 1/0/11 to VLAN 100 and VLAN 500. Configure
GigabitEthernet 1/0/12 in the same way.
[SwitchA] interface GigabitEthernet 1/0/11
[SwitchA-GigabitEthernet1/0/11] port link-type trunk
[SwitchA-GigabitEthernet1/0/11] port trunk pvid vlan 100
[SwitchA-GigabitEthernet1/0/11] port trunk permit vlan 100 500
[SwitchA-GigabitEthernet1/0/11] quit
1-32