H3C S5600 SERIES Operation Manual page 946

Hide thumbs Also See for S5600 SERIES:
Table of Contents

Advertisement

To do...
Configure the output rules of
system information
Set the format of time stamp in
the output information
Setting to Output System Information to the Log Buffer
Follow these steps to set to output system information to the log buffer:
To do...
Enter system view
Enable the information center
Enable information output to
the log buffer
Configure the output rules of
system information
Set the format of time stamp in
the output information
Setting to Output System Information to the SNMP NMS
Follow these steps to set to output system information to the SNMP NMS:
To do...
Enter system view
Enable the information center
Enable information output to
the SNMP NMS
Use the command...
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Use the command...
system-view
info-center enable
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ]*
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Use the command...
system-view
info-center enable
info-center snmp channel
{ channel-number |
channel-name }
1-14
Remarks
Optional
Refer to
Table 1-4
for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output trap
information is date.
Remarks
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 4 to output
log information to the log buffer,
which can holds up to 512
items by default.
Optional
Refer to
Table 1-4
for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output log
information is date.
Remarks
Optional
Enabled by default.
Optional
By default, the switch outputs
trap information to SNMP
through channel 5.

Advertisement

Table of Contents
loading

Table of Contents