H3C S5600 SERIES Operation Manual page 558

1
Web Authentication Configuration
When configuring Web authentication, go to these sections for information you are interested in:
Introduction to Web Authentication
Web Authentication Configuration
Displaying and Maintaining Web Authentication
Web Authentication Configuration Example
Introduction to Web Authentication
Web authentication is a port-based authentication method that is used to control the network access
rights of users. With Web authentication, users are freed from installing any special authentication client
software.
With Web authentication enabled, before a user passes the Web authentication, it cannot access any
network, except that it can access the authentication page or some free IP addresses. After the user
passes the Web authentication, it can access any reachable networks.
Web Authentication Configuration
Configuration Prerequisites
Configure an ISP domain and an AAA RADIUS scheme for the domain before performing the following
configurations.
Web authentication can use only a RADIUS authentication scheme; it does not support local
authentication and local RADIUS authentication.
The user number limit configured under an AAA scheme does not take effect for Web
authentication. Web authentication does not support accounting. Disable accounting for the AAA
scheme.
Configuring Web Authentication
Follow these steps to configure Web authentication:
To do...
Enter system view
Use the command...
system-view
1-1
Remarks
—