H3C S5600 SERIES Operation Manual page 559

To do...
Set the IP address and port
number of the Web
authentication server
Enable Web authentication
globally
Enable Web authentication on
a port
Set a free IP address range that
can be accessed by users
before Web authentication
Set an authentication-free user
Forcibly log out the specified or
all users.
Set the idle user checking
interval for Web authentication
Set the maximum number of
online Web authentication
users on a port
Use the command...
web-authentication
web-server ip ip-address
[ port port-number ]
web-authentication enable
interface interface-type
interface-number
web-authentication select
method { shared |
designated }
quit
web-authentication free-ip
ip-address { mask-length |
mask }
web-authentication free-user
ip ip-address mac
mac-address
web-authentication cut
connection { all | mac
mac-address | user-name
user-name | interface
interface-type
interface-number }
web-authentication timer
idle-cut timer
web-authentication
max-connection number
1-2
Remarks
Required
If no port number is specified,
port 80 will be used.
No Web authentication server
is set by default.
Required
Disabled globally by default
Required
Disabled on port by default
Optional
No such address range by
default
Optional
No such user by default
Optional
Optional
900 seconds by default
Optional
128 users by default