H3C S5600 SERIES Operation Manual page 909

Follow these steps to create an FTP user:
To do...
Enter system view
Add a local user and enter local
user view
Configure a password for the
specified user
Configure the service type as
FTP
Enabling an FTP server
Follow these steps to enable an FTP server:
To do...
Enter system view
Enable the FTP server function
Only one user can access an H3C S5600 series Ethernet switch at a given time when the latter
operates as an FTP server.
Operating as an FTP server, an H3C S5600 series Ethernet switch cannot receive a file whose size
exceeds its storage space. The clients that attempt to upload such a file will be disconnected with
the FTP server due to lack of storage space on the FTP server.
When you log in to a Fabric consisting of multiple switches through an FTP client, after the FTP
client passes authentication, you can log in to the master device of the Fabric.
You cannot access an H3C S5600 series switch operating as an FTP server through Microsoft
Internet Explorer. To do so, use other client software.
To protect unused sockets against attacks, the S5600 Ethernet switch provides the following functions:
TCP 21 is enabled only when you start the FTP server.
TCP 21 is disabled when you shut down the FTP server.
Use the command...
system-view
local-user user-name
password { simple | cipher }
password
service-type ftp
Use the command...
system-view
ftp server enable
1-3
Remarks
—
Required
By default, no local user is
configured.
Optional
By default, no password is
configured.
Required
By default, no service is
configured.
Remarks
—
Required
Disabled by default.