Interface-Type Interface-Number ]; Available In Any View; Displaying Poe Profile Configuration; Poe Profile Configuration Example - H3C S5600 SERIES Operation Manual

The display current-configuration command can be used to query which PoE profile
is applied to a port. However, the command cannot be used to query which PoE
features in a PoE profiles are applied successfully.
1) PoE profile configuration is a global configuration, and applies synchronously in the
Intelligent Resilient Framework (IRF) system.
2) Combination of Unit creates a new Fabric. In the newly created Fabric, the PoE profile
configuration of the Unit with the smallest Unit ID number will become the PoE profile
configuration for the Fabric currently in use.
3) Split of Fabric results in many new Fabrics. In each newly created Fabric, the PoE
profile configuration of each Unit remains the same as it was before the split.

Displaying PoE Profile Configuration

To do...
Display the detailed
information about the PoE
profiles created on the
switch

PoE Profile Configuration Example

PoE Profile Application Example

Network requirements
Switch A is an S5600 series Ethernet switch supporting PoE.
GigabitEthernet 1/0/1 through GigabitEthernet 1/0/10 of Switch A are used by users of
group A, who have the following requirements:
The PoE function can be enabled on all ports in use.
Signal mode is used to supply power.
The PoE priority for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 is Critical,
whereas the PoE priority for GigabitEthernet 1/0/6 through GigabitEthernet 1/0/10 is
High.
The maximum power for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 ports is
3000 mW, whereas the maximum power for GigabitEthernet 1/0/6 through
GigabitEthernet 1/0/10 is 15400 mW.
Based on the above requirements, two PoE profiles are made for users of group A.
Apply PoE profile 1 for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5;
Apply PoE profile 2 for GigabitEthernet 1/0/6 through GigabitEthernet 1/0/10.
Use the command...
display poe-profile
{ all-profile | interface
interface-type
interface-number | name
profile-name }
2-3
Remarks

Available in any view