H3C S5600 SERIES Operation Manual page 871

To do...
Specify a source IP
address for the SSH client
Specify a source interface
for the SSH client
Establishing the connection between the SSH client and server
The client's method of establishing an SSH connection to the SSH server varies with authentication
types.
Table 1-18 Follow these steps to establish an SSH connection:
To do...
Enter system view
Start the client to
establish a connection
with an SSH server
When logging into the SSH server using public key authentication, an SSH client needs to read its local
private key for authentication. As two algorithms (RSA or DSA) are available, the identity-key keyword
must be used to specify one algorithm in order to get the correct private key.
Use the command...
ssh2 source-ip ip-address
ssh2 source-interface
interface-type
interface-number
Use the command...
system-view
ssh2 { host-ip | host-name }
[ port-num ] [ identity-key
{ dsa | rsa } | prefer_kex
{ dh_group1 |
dh_exchange_group } |
prefer_ctos_cipher { des |
aes128 } | prefer_stoc_cipher
{ des | aes128 } |
prefer_ctos_hmac { sha1 |
sha1_96 | md5 | md5_96 } |
prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] *
1-20
Remarks
Optional
By default, the system determines a
source IP address.
Optional
By default, the system determines a
source interface.
Remarks
—
Required
In this command, you can also specify
the preferred key exchange algorithm,
encryption algorithms and HMAC
algorithms between the server and
client.
HMAC: Hash-based message
authentication code
Note that:
The identity-key keyword is
unnecessary in password
authentication and optional in public
key authentication.