Configuring An Ssh Client Assumed By An Ssh2-Capable Switch - H3C S5600 SERIES Operation Manual

Hide thumbs Also See for S5600 SERIES:

Table of Contents

Figure 1-9 SSH client configuration interface 3

Click Browse... to bring up the file selection window, navigate to the private key file and click Open. If

the connection is normal, a user will be prompted for a username. Once passing the authentication, the

user can log in to the server.

Configuring an SSH Client Assumed by an SSH2-Capable Switch

Table 1-14 Complete the following tasks to configure an SSH client that is assumed by an

SSH2-capable switch:

Configuring the SSH client for publickey

authentication

Configuring whether first-time authentication is

Specifying a source IP address/interface for the

Establishing the connection between the SSH

client and server

Configuring the SSH client for publickey authentication

When the authentication mode is publickey, you need to configure the RSA or DSA public key of the

client on the server:

To generate a key pair on the client, refer to

To export the RSA or DSA public key of the client, refer to

Not necessary when the authentication

mode is password.

Required when the authentication mode is

Generating/Destroying Key

Exporting the RSA or DSA Public

Table of Contents