Vlan-Interface; Displaying And Maintaining Vrrp; Vrrp Configuration Examples; Single-Vrrp Group Configuration - H3C S5600 SERIES Operation Manual

Displaying and Maintaining VRRP

To do...
Display VRRP statistics
information
Display VRRP state information
Clear VRRP statistics
information

VRRP Configuration Examples

Single-VRRP Group Configuration

Network requirements
Host A uses the VRRP virtual router comprising switch A and switch B as its default gateway to visit host
B on the Internet.
The information about the VRRP group is as follows:
VRRP group ID: 1
Virtual router IP address: 202.38.160.111/24
Master: Switch A
Backup: Switch B
Preemptive mode: enabled
Table 1-1 Network description
Switch
connecting to Host A
LSW-A GigabitEthernet 1/0/6
LSW-B GigabitEthernet 1/0/5
display vrrp statistics [ interface
vlan-interface vlan-id [ vrid
virtual-router-id ] ]
display vrrp [ verbose ] [ interface
vlan-interface vlan-id [ vrid
virtual-router-id ] ]
reset vrrp statistics [ interface
vlan-interface vlan-id [ vrid
virtual-router-id ] ]
Ethernet port IP address of the
202.38.160.1/24
202.38.160.2/24
Use the command...
Switch priority in
VLAN interface the VRRP group
110
100 (default)
1-10
Remarks
Available in any
view
Available in user
view
Preemptive
mode
Enabled
Enabled