Configuring Description Information For Msdp Peers; Configuring An Msdp Mesh Group; Configuring Msdp Peer Connection Control - H3C S5600 SERIES Operation Manual

Configuring an MSDP Mesh Group

Configuring MSDP Peer Connection Control

Configuring Description Information for MSDP Peers

You can configure description information for each MSDP peer to manage and memorize the MSDP
peers.
Follow these steps to configure description information for an MSDP peer:
To do...
Enter system view
Enter MSDP view
Configure description
information for an MSDP
peer
Configuring an MSDP Mesh Group
Configure a mesh group name on all the peers that will become members of the MSDP mesh group so
that the peers are fully connected with one another in the mesh group.
Follow these steps to configure an MSDP mesh group:
To do...
Enter system view
Enter MSDP view
Add an MSDP peer to a
mesh group
Before you configure an MSDP mesh group, make sure that the routers are fully connected with
one another.
The same group name must be configured on all the peers before they can join a mesh group.
If you add the same MSDP peer to multiple mesh groups, only the latest configuration takes effect.
Configuring MSDP Peer Connection Control
The connection between MSDP peers can be flexibly controlled. You can disable the MSDP peering
relationships temporarily by shutting down the MSDP peers. As a result, SA messages cannot be
transmitted between these two peers. On the other hand, when resetting an MSDP peering relationship
Task
Use the command...
system-view
msdp
peer peer-address
description text
Use the command...
system-view
msdp
peer peer-address
mesh-group name
5-9
Remarks
Optional
Optional
Remarks
—
—
Optional
By default, an MSDP peer has no
description information.
Remarks
—
—
Required
By default, an MSDP peer does not
belong to any mesh group.