H3C S5600 SERIES Operation Manual page 16

Part
24 DHCP
25 ACL
26 QoS-QoS Profile
27 Mirroring
28 IRF Fabric
29 Cluster
30 PoE-PoE Profile
31 UDP Helper
32 SNMP-RMON
33 NTP
34 SSH Terminal Service
35 File System Management
36 FTP-SFTP-TFTP
37 Information Center
38 System Maintenance and Debugging
Features
DHCP client/BOOTP client
DHCP server
DHCP relay
DHCP Snooping
DHCP accounting
Using Option184 in DHCP server
Using Option82 in DHCP relay and DHCP Snooping
DHCP packet rate limitation
Basic ACLs
Advanced ACLs
Layer 2 ACLs
User-defined ACLs
Applying ACLs on ports
Applying ACLs to VLANs
Quality of Service (QoS)
QoS profile
Traffic mirroring
Local port mirroring
Remote port mirroring
IRF Fabric
Peer end detection for stack ports
Huawei Group Management Protocol (HGMP) v2
Neighbor Discovery Protocol (NDP)
Neighbor Topology Discovery Protocol (NTDP)
Power over Ethernet (PoE)
PoE profile
Forwarding UDP broadcast packets by using UDP
Helper
Simple Network Management Protocol (SNMP) v3,
compatible with SNMP v1/v2
Support of Trap parameters configuration
Remote monitoring (RMON)
Network Time Protocol (NTP)
Secure shell (SSH) v2.0, compatible with SSHv1.5
File system configuration
File attribute configuration
Configuration file backup and restoration
Operating as an FTP server/FTP client
Operating as an SFTP server/SFTP client
Operating as a TFTP client
System logs
Hierarchical alarms
Debugging information output
Loading Boot ROM and software in multiple ways
Basic system configuration and debugging
Network connectivity test
Device management
3-4