Local Boot Rom And Software Loading; Boot Menu - H3C S5600 SERIES Operation Manual

The Boot ROM software version should be compatible with the host software version when you load the
Boot ROM and host software.

Local Boot ROM and Software Loading

If your terminal is directly connected to the Console port of the switch, you can load the Boot ROM and
host software locally.
Before loading the software, make sure that your terminal is correctly connected to the switch.
The loading process of the Boot ROM software is the same as that of the host software, except that
during the former process, you should press "6" or <Ctrl+U> and <Enter> after entering the BOOT
menu and the system gives different prompts. The following text mainly describes the Boot ROM
loading process.

BOOT Menu

Starting......
***********************************************************
*
*
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date
CPU Clock Speed : 400MHz
BUS Clock Speed : 33MHz
Memory Size
Mac Address
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
H3C S5600-50C BOOTROM, Version 506
: May 30 2007, 09:57:40
: 128MB
: 000fe2123456
1-2
*
*
*