Vlan Mapping Configuration Example - H3C S5600 SERIES Operation Manual

Hide thumbs Also See for S5600 SERIES:

Table of Contents

[Sysname-GigabitEthernet1/0/2] traffic-priority inbound ip-group 3000 rule 2

local-precedence 2

[Sysname-GigabitEthernet1/0/2] quit

3) Configure queue scheduling

# Apply SP queue scheduling algorithm.

[Sysname] queue-scheduler strict-priority

VLAN Mapping Configuration Example

Network requirements

Two customer networks are connected to the public network through Switch A and Switch

B. Configure the VLAN mapping function on the switches to enable the hosts on the two

customer networks to communicate through public network VLANs.

Switch A provides network access for terminal devices in VLAN 100 and VLAN 200

through GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12. On the other side of the

public network, Switch B provides network access for servers in VLAN 100 and VLAN

200 through GigabitEthernet 1/0/15 and GigabitEthernet 1/0/16.

Switch A provides access to the public network through GigabitEthernet 1/0/10 and

Switch B provides access to the public network through GigabitEthernet 1/0/17.

Configure the switches to have packets of VLAN 100 and packets of VLAN 200 transmitted

in VLAN 500 and VLAN 600 across the public network.

Table of Contents