Throttle Position Sensor - Chrysler 2005 Crossfire SRT6 Service Manual

ZH
5. Install the throttle body inlet tube (1) by installing
the upper air cleaner housing and tubes (2), then
install the inlet tube to the throttle body by pushing
the throttle body inlet tube in firmly on the throttle
body, ensuring the inlet tube lever (3) is attached.
6. Connect the negative battery cable.

THROTTLE POSITION SENSOR

DESCRIPTION
The Throttle Position Sensor (TPS) is a part of the Throttle Body.
The TPS cannot be serviced separately. Refer to the Throttle Body removal and installation procedures. (Refer to 14
- FUEL SYSTEM/FUEL INJECTION/THROTTLE BODY - REMOVAL).
FUEL INJECTION 14 - 61