Displaying The Amount Of Remaining Media On The Printer's Screen; Verifying The Setting For The Amount Remaining Every Time The Media Is Changed - Roland XC-540 User Manual

Displaying the Amount of Remaining Media on the Printer's Screen

Procedure
–
MENU
SHEET REMAIN
—
SHEET REMAIN
SET LENGTH
˜
SET LENGTH
0.0 m
25.0 m
™
W 1839 mm L 25.0 m
This display is updated.
SETUP SHEET
ROLL L 25.0 m
If setup has not been performed, the set value flashes.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media or
raising the loading lever, the amount remaining at that time flashes on the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the setting whenever
you change the media.
Note, however, that when sheet media is loaded (that is, when [SETUP SHEET] is set to "PIECE"), the setting for the
amount of remaining media is made automatically.
You can also make the setting display this menu automatically whenever you change the media. See the next section,

"Verifying the Setting for the Amount Remaining Every Time the Media Is Changed."

Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
Verifying the Setting for the Amount Remaining Every Time the Media Is Changed
Procedure
–
MENU
SHEET REMAIN
—
SHHET REMAIN
AUTO DISPLAY
˜
AUTO DISPLAY
DISABLE ENABLE
™
W 1346mm
SETUP SHEET
ROLL
Press .
Press twice.
Press .
Press .
Press .
Use to set the amount of media remaining.
Press to enable the setting.
Press .
Press to go back to the original screen.
Press .
Press twice.
Press .
Press twice.
Press .
Use to select "ENABLE."
Press to enable the setting.
Press .
Press to go back to the original screen.
6-5 Setting How the Printer Operates
Chapter 6 Feature Reference 95