Table of Contents
Advertisement
Managing the Operations Appropriately and Efficiently
Displaying the Amount of Media Remaining
You can display how much of the media in use is left. By setting the amount of media currently remaining
at the start, the amount remaining will be constantly displayed on the screen until it reaches zero.
If you remove the media or cancel media loading by raising the loading lever, the amount remaining at
that time flashes on the screen. Because the amount of media remaining is not updated automatically
when you change the media, redo the setting whenever you change the media. You can also set the ma-
chine to display this menu automatically whenever you change the media.
MEMO
The remaining amount that is displayed is only an estimate. Accuracy is not assured.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the following screen.
MENU
SHEET REMAIN
3.
Press [▶], then [▼] to display the screen shown below.
SHEET REMAIN
SET LENGTH
4.
Press [▶] to display the following screen.
SET LENGTH
0.0m
5.
Press [▲] or [▼] to set the current amount of media remaining.
SET LENGTH
0.0m
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to return to the original screen.
W 736mm Ｌ 25.0m
•
: This display is updated.
•
: If media has not been loaded, the set value flashes.
MEMO
Default setting: 0.00 m
206
Optimizing Operation Management
99.9m
25.0m
SETUP SHEET
ROLL
L 25.0m
Advertisement
Table of Contents
