52 Chapter 5 Using CallPilot Manager to monitor hardware
"Running integrated diagnostics" (page 60)
"Viewing the last diagnostic results" (page 63)
Introducing the Maintenance page
Introduction
Use the Maintenance page in CallPilot Manager to do the following:
•
•
•
•
•
What the Maintenance page provides
The Maintenance page identifies the server platform and switch connectivity
type. It also provides a tree that, when expanded, lists the physical and
logical hardware components down the left side of the page. To list the
server hardware components, click the plus sign (+) at the top of the tree. To
list the subcomponents for each component, click the plus sign (+) beside
the component.
The following illustration shows a partially expanded tree for the 201i server.
Copyright © 2007, Nortel Networks
.
Obtain general information about components.
View component states.
Start and stop components.
Run integrated diagnostic tests.
View the results of the last diagnostic test run against a component.
Note: The components that are listed on the Maintenance page are
based on the CallPilot server type and the switch that is connected to
CallPilot. The examples in this chapter are for illustration purposes and
may not appear exactly the same on your system.
Nortel CallPilot
201i Server Maintenance and Diagnostics
NN44200-705 01.01 Standard
5.0 23 February 2007
Nortel Networks Confidential