Selecting Fader Modes - Yamaha DM 2000 Owner's Manual

44
Chapter 3—Operating Basics
Auto Channel Select & Touch Sense Select
While the Auto Channel Select preference is on (see page 235), channels can be selected by
moving the corresponding fader or Encoder, or by turning on the corresponding [AUTO],
[SOLO], or [ON] button.
While the Touch Sense Select preference is on (see page 237), channels can be selected sim-
ply by touching the fader knobs.

Selecting Fader Modes

The exact function of each fader depends on the selected Layer and Fader mode.
Select a Layer, as explained on page 42.
1
2 Use the FADER MODE buttons to select a Fader mode.
[FADER]: Channel faders control Input Channel levels or Output Chan-
nel master levels, depending on the selected Layer.
[AUX/MTRX]: Channel faders control Aux or Matrix Send levels,
depending on the selected Layer.
The indicator of the currently selected FADER MODE button lights up.
The following table shows the channel fader functions for each Layer and Fader mode.
Layer
1-24
25–48
49–72
73–96
Master
Remote
DM2000—Owner's Manual
Fader
Mode
Fader
Aux/Mtrx
Fader
Aux/Mtrx
Fader
Aux/Mtrx
Fader
Aux/Mtrx
Bus Out 1–8:
Fader
master level
Bus Out 1–8:
Aux/Mtrx
Matrix Send level
Fader
Operation depends on the selected target. See "About Remote Layers" on
1–4
Aux/Mtrx
Fader
1–8 9–16
CH 1–24: level
CH 1–24: Aux Send level
CH 25–48: level
CH 25–48: Aux Send level
CH 49–72: level
CH 49–72: Aux Send level
CH 73–96 level
CH 73–96: Aux Send level
Aux Send 1–12: master level
Aux Send 1–12: Matrix Send level
page 217 for more information.
FADER MODE
FADER AUX / MTRX
17–20 21–24
Matrix
Send 1–4:
master
level
No opera-
tion: Fad-
ers fixed
at –∞