Yamaha DM 2000 Owner's Manual page 246

232
Chapter 21—Other Functions
user memories, individual user memories, and for the Bus to Stereo, Input Patch, Output
Patch, Surround Monitor libraries you can also select the current settings.
BANK: Saves the User Defined Remote banks, User Defined Plug-Ins banks, or the User
Defined Keys banks. For each item you can select ALL or individual banks.
SETUP MEM: Saves the DM2000 setup data (i.e., system settings).
PGM TABLE: Saves the Scene to MIDI Program Change table. See "Assigning Scenes to
Program Changes" on page 185.
CTL TABLE: Saves the Parameter to MIDI Control Change table. See "Assigning Parame-
ters to Control Changes" on page 186.
PLUG-IN: Saves the settings of the effects processing cards installed in the Slots. You can
save ALL Slots or individual Slots.
Loading
DM2000 data can be loaded from SmartMedia as follows.
Use the DISPLAY ACCESS [DATA] button to locate the Load page.
1
2 Insert your SmartMedia card into the CARD slot.
To load data, use the buttons in the CATEGORY box to select the type of file
3
you want to load, select a file in the LIST box, select the LOAD button, and
then press [ENTER].
The FILE INFORMATION box displays the filename and the date when the currently
selected file was last stored. See "Saving" on page 231 for information on the PATH and
LIST boxes and the SmartMedia icon.
DM2000—Owner's Manual