Yamaha DM 2000 Owner's Manual page 292

278
Appendix A: Parameter Lists
REV+SYMPHO.
One input, two output reverb and symphonic effects in parallel.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV/SYM
FREQ.
DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
REV->SYMPHO.
One input, two output reverb and symphonic effects in series.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
DM2000—Owner's Manual
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and symphonic balance (0% = all reverb, 100% = all
0–100%
symphonic)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and symphonic reverb balance (0% = all symphonic
0–100%
reverb, 100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.