Channel Names
The channel strip displays also display the names or IDs of all the channels on the currently
selected Layer. Each Input and Output Channel has a fixed Channel ID and Short and Long
names that you can edit. See "Naming Channels" on page 130.
C H 0 1
To display a channel's Long name, press and hold its [SEL] button.
1
After about one second, the channel's Short name, Long name, and Channel ID are dis-
played, as shown below.
C H 0 1
Channel ID
All other items in the displays are turned off while the [SEL] button is held down.
Release the [SEL] button when you've finished.
2
The channel strip displays return to normal.
Input Patch, Insert In Patch, Insert Out Patch & Direct Out
When the Input Patch, Insert In Patch, Insert Out Patch, or Direct Out parameter is
assigned to the Encoders, the Encoder displays show Port IDs. See "Patching with the
Encoders" on page 67 for more information.
You can choose whether the Short names or Channel IDs are displayed
in the preferences. See "Channel ID/Channel" on page 236.
A C G T
Short Name
Channel Strip Displays
A C O U S T I C G U I T A R
Long Name
DM2000—Owner's Manual
41