Yamaha DM 2000 Owner's Manual page 294

280
Appendix A: Parameter Lists
DELAY+ER.
One input, two output delay and early reflections effects in parallel.
Parameter
DELAY L
DELAY R
FB. DLY
FB. GAIN
HI. RATIO
HPF
LPF
DLY/ER
TYPE
ROOMSIZE
LIVENESS
INI. DLY
DIFF.
DENSITY
ER NUM.
SYNC
NOTE L
NOTE R
NOTE FB
1.
tempo setting)
DM2000—Owner's Manual
Range Description
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Delay and early reflections balance (0% = all delay, 100% =
0–100%
all early reflections)
S-Hall, L-Hall, Random,
Type of early reflection simulation
Revers, Plate, Spring
0.1–20.0 Reflection spacing
0–10 Early reflections decay characteristics (0 = dead, 10 = live)
0.0–500.0 ms Initial delay before reverb begins
0–10 Spread
0–100% Reverb density
1–19 Number of early reflections
OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
1
DELAY L
Used in conjunction with TEMPO to determine right chan-
1
nel DELAY R
Used in conjunction with TEMPO to determine FB. DLY
1
(Maximum value depends on the