Compressing The Stereo Out; Grouping Master Compressors; Muting The Stereo Out (On/Off); Grouping Master Mutes (On/Off) - Yamaha DM 2000 Owner's Manual

Compressing the Stereo Out

Signal dynamics can be controlled by using the Stereo Out Compressor. See "Compressing
Channels" on page 113 for more information.

Grouping Master Compressors

The Stereo Out Compressor can be grouped with the Compressors of other Output Chan-
nels. See "Grouping Output Channel Compressors" on page 116 for more information.

Muting the Stereo Out (ON/OFF)

The Stereo Out can be muted by using the STEREO [ON] button, which is used
exclusively for this task and is not affected by the Layers. Its indicator lights up
ON
when the Stereo Out is on.

Grouping Master Mutes (ON/OFF)

The Stereo Out Mute can be grouped with the Mutes of other Output Channels. See
"Grouping Output Channel Mutes (ON/OFF)" on page 123 for more information.

Setting the Stereo Out Level

The Stereo Out level is set by using the STEREO fader, which is used exclu-
sively for this task and is not affected by the Layers or Fader modes.

Grouping Master Faders

The Stereo Out fader can be grouped with the faders of other Output Channels. See
"Grouping Output Channel Faders" on page 122 for more information.

Sending the Stereo Out to the Matrix Sends

The left and right channels of the Stereo Out can be sent individually to the Matrix Sends.
See "Matrix Sends" on page 97 for more information.
Compressing the Stereo Out
DM2000—Owner's Manual
83
0
5
10
15
20
30
40
50
60
70
STEREO