Yamaha DM 2000 Owner's Manual page 24

10
Chapter 2—Control Surface & Rear Panel
D
PLUG-INS button
This button is used to select the Plug-Ins in conjunction with the EFFECTS/PLUG-INS
[1–8] buttons. Its indicator lights up when it's pressed. See "Editing Plug-Ins" on page 153
for more information.
E
CHANNEL INSERTS button
If an internal effects processor or Y56K card effects chain is inserted in the currently selected
channel, the relevant Effects Edit or Plug-In Edit page appears when this button is pressed,
and its indicator lights up. In addition, the corresponding EFFECTS/PLUG-INS [1–8] but-
ton indicator flashes. If it's a Y56K that is inserted, the [PLUG-INS] button indicator also
flashes. If it's an internal effects processor, the [INTERNAL EFFECTS] button indicator
flashes. A warning message appears if there's nothing inserted in the currently selected
channel. See "Editing Effects" on page 150 and "Editing Plug-Ins" on page 153 for more
information.
F
EFFECTS/PLUG-INS 1–8 buttons
These buttons are used to select the internal effects processors, GEQs, and Plug-Ins in con-
junction with the EFFECTS/PLUG-INS [INTERNAL EFFECTS], [GRAPHIC EQUALIZ-
ERS], and [PLUG-INS] buttons. The button indicator of the currently selected internal
effects processor, GEQ, or Plug-In lights up. Since there are six GEQs, buttons [7] and [8]
are inactive when the [GRAPHIC EQUALIZERS] button's indicator is lit. When the
EFFECTS/PLUG-INS [CHANNEL INSERTS] button indicator is lit, all of these buttons are
inactive.
G
Parameter Up/Down buttons
These buttons are used to select the rows of internal effects processor and Plug-In parame-
ters for editing with Parameter controls 1–4. The parameters in the currently selected row
appear highlighted. Up to 16 parameters can be displayed at a time. If more are available,
an up or down arrow is displayed. See "Editing Effects" on page 150 and "Editing Plug-Ins"
on page 153 for more information.
H
Parameter controls 1–4
These are rotary controls and push switches. The rotary controls are used to edit the param-
eters of the currently selected internal effects processor, Plug-In, or GEQ. When the Effects
Edit page is selected, they control the currently selected row of parameters, rows being
selected by the Parameter Up/Down buttons. When the Graphic Equalizer Edit page is
selected, Parameter control #1 selects the frequency bands and Parameter control #4 sets the
gain of the selected band. Parameter controls #2 and #3 are inactive. See "Editing Effects"
on page 150, "Editing Plug-Ins" on page 153, and "Editing GEQs" on page 155 for more
information.
The push switches are used to punch the Effects or Plug-In parameters currently being con-
trolled by the rotary controls in and out during Automix recording. See "Punching In & Out
Individual Parameters" on page 175 for more information.
DM2000—Owner's Manual