Yamaha DM 2000 Owner's Manual page 296

282
Appendix A: Parameter Lists
DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter
DELAY L
DELAY R
FB. DLY
FB. GAIN
DELAY HI
HPF
LPF
DLY/REV
INI. DLY
REV TIME
REV HI
DIFF.
DENSITY
SYNC
NOTE L
NOTE R
NOTE FB
1.
tempo setting)
DM2000—Owner's Manual
Range Description
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
0.1–1.0 Delay high-frequency feedback ratio
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
0–100% Delay and reverb balance (0% = all delay, 100% = all reverb)
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
1
DELAY L
Used in conjunction with TEMPO to determine right chan-
1
nel DELAY R
1 Used in conjunction with TEMPO to determine FB. DLY
(Maximum value depends on the