Setting Send Levels; Muting Sends; Panning Sends - Yamaha DM 2000 Owner's Manual

Setting Send Levels

Send levels can be set as follows.
Use the AUX SELECT [AUX 1–5] (SEND A–E) buttons to select the sends.
1
The ENCODER MODE [AUX/MTRX] (SEND LEVEL) button indicator lights up, as does
the button indicator of the selected send.
The levels for the selected send are displayed by the channel strip displays. See "Send Level"
on page 193 for more information.
Use the Encoders to set the send levels.
2
You can view send levels in dB on the channel strip displays by holding down the USER
DEFINED KEYS [13] (ALT/FINE) button while adjusting the Encoders.
Send levels can also be set by using the faders in Flip mode. See "Flip Mode" on page 208 for
more information.

Muting Sends

Sends can be muted as follows.
Press the MATRIX SELECT [MATRIX 2] (SEND MUTE) button.
1
2 Use the AUX SELECT [AUX 1–5] (SEND A–E) buttons to select the sends.
The ENCODER MODE [AUX/MTRX] (SEND LEVEL) button indicator lights up, as does
the button indicator of the selected send.
Use the Encoder push-switches to mute the sends.
3
When a send is muted, the ring of the corresponding channel strip display flashes.
Sends can also be muted by using the [ON] buttons in Flip mode. See "Flip Mode" on page
208 for more information.

Panning Sends

Only sends assigned to stereo destinations can be panned. Sends can be panned by using the
Encoders in Flip mode. See "Flip Mode" on page 208 for more information.
Setting Send Levels
DM2000—Owner's Manual
207