Yamaha DM 2000 Owner's Manual page 304

290
Appendix A: Parameter Lists
COMP 5.1
Six input, six output compressor for 5.1 surround, with individual solo for each band, and
gain reduction metering of left and right (L+R), left surround and right surround (LS+RS),
center (C), or LFE channels.
Parameter
LOW GAIN
MID GAIN
HI. GAIN
PRESENCE
THRE
RATIO
ATTACK
RELEASE
KNEE
LOOKUP
CEILING
L–M XOVR
M–H XOVR
SLOPE
KEY LINK
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
2. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is indepen-
dent). 3+2: key-in of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are
linked, and LS and RS are linked.
DM2000—Owner's Manual
Range Description
–96.0 to +12.0 dB Low band level
–96.0 to +12.0 dB Mid band level
–96.0 to +12.0 dB High band level
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
–10 to +10
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
–24.0 dB to 0.0 dB Compressor threshold
1:1 to 20:1 Compressor ratio
0–120 ms Attack
1
Expander release time
0–5 Compressor knee
0.0–100.0 ms Lookup delay
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level
21.2 Hz–8.00 kHz Low/mid crossover frequency
21.2 Hz–8.00 kHz Mid/high crossover frequency
–6 dB to –12 dB Filter slope
2
Key-in linking