Setting Aux Send Levels - Yamaha DM 2000 Owner's Manual

Setting Aux Send Levels

Aux Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND
LEVEL controls, the faders, or the Encoders.
Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls
Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
1
buttons to select Input Channels.
Use the [BANK] button to select Aux 1–4, Aux 5–8, or Aux 9–12.
2
3 Use the LEVEL controls to set the Aux Send levels.
Using the Faders
Use the LAYER buttons to select the Input Channel Layers.
1
Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx
2
Fader mode.
Use the AUX SELECT [1–12] buttons to select Aux Sends 1–12.
3
4 Use the faders to set the Aux Send levels.
Refer to the legend on the left side of the faders when setting Aux Send levels.
Using the Encoders
Use the LAYER buttons to select the Input Channel Layers.
1
Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
2
Encoder mode.
Use the AUX SELECT [1–12] buttons to select Aux Sends 1–12.
3
4 Use the Encoders to set the Aux Send levels.
AUX / MATRIX SEND
DISPLAY
LEVEL LEVEL
BANK ON ON
AUX 1 / MATRIX 1 AUX 2 / MATRIX 2
5 6
AUX AUX
9 10
AUX AUX
Setting Aux Send Levels
LEVEL LEVEL
ON ON
AUX 3 / MATRIX 3 AUX 4 / MATRIX 4
7 8
AUX AUX
11 12
AUX AUX
DM2000—Owner's Manual
89
10 0
5 5
0 10
5 15
10 20
15 30
20 40
30 50
40 60
50 70