Balancing The Stereo Out; Delaying The Stereo Out; Inserting Geqs; Viewing Stereo Out Settings - Yamaha DM 2000 Owner's Manual

84
Chapter 8—Stereo Out

Balancing the Stereo Out

The left and right channels of the Stereo Out can be balanced as follows.
Press the STEREO [SEL] button to select the Stereo Out.
1
Use the Pan control to set the balance.
2
The pan display indicates the balance. When the balance is set to center, the center two seg-
ments light up. Balance can be set to center by pressing [ENTER].
The Stereo Out balance can also be set on the Stereo Fader View page. See "Viewing Channel
Fader Settings" on page 125 for more information.

Delaying the Stereo Out

The left and right channels of the Stereo Out can be delayed independently by using the Ste-
reo Out Delay. See "Delaying Channel Signals" on page 117 for more information.

Inserting GEQs

Internal GEQs can be inserted into the left and right channels of the Stereo Out. See "About
the GEQs" on page 155 for more information.

Viewing Stereo Out Settings

Parameter and fader settings for the Stereo Out can be viewed and set on the View pages.
See "Viewing Channel Parameter Settings" on page 124 and "Viewing Channel Fader Set-
tings" on page 125 for more information.

Copying Stereo Out Settings

Settings can be copied between the left and right channels of the Stereo Out by using the
Channel Copy function. See "Copying Channel Settings" on page 129 for more informa-
tion.

Naming the Stereo Out

The Stereo Out can be named for easy identification. See "Naming Channels" on page 130
for more information.
DM2000—Owner's Manual
PAN / SURROUND
L
DISPLAY
ODD
L R
R
EVEN