Initializing the DM2000
The DM2000 can be initialized as follows.
Warning: This procedure will clear all user memories and reset all settings to their initial val-
ues. You may want to back up any important data beforehand via MIDI Bulk Dump (see
page 187), or to SmartMedia (see page 231). If you want to reset just the mix settings, recall
scene memory #0 instead (see page 157).
1
Turn off the DM2000.
While holding down the SCENE MEMORY [STORE] button, turn on the
2
DM2000.
When the confirmation message appears, release the SCENE MEMORY
3
[STORE] button, select YES, and press [ENTER].
The following message is displayed while initialization is in progress: "Loading Factory Pre-
sets & Calibrating the Faders... Do Not Touch the Faders!"
It's important that you do not touch the faders while this message is displayed, as the faders
may not be calibrated correctly.
The display returns to normal when initialization is complete.
Initializing the DM2000
DM2000—Owner's Manual
239