Yamaha DM 2000 Owner's Manual page 279

GATE REVERB, REVERSE GATE
One input, two output early reflections with gate, and early reflections with reverse gate.
Parameter Range
TYPE
Type-A, Type-B
ROOMSIZE
0.1–20.0
LIVENESS
0–10
INI. DLY
0.0–500.0 ms
DIFF.
0–10
DENSITY
0–100%
HI. RATIO
0.1–1.0
ER NUM.
1–19
FB GAIN
–99 to +99%
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
MONO DELAY
One input, one output basic repeat delay.
Parameter Range
DELAY
0.0–2730.0 ms
FB. GAIN
–99 to +99%
HI. RATIO
0.1–1.0
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
SYNC
OFF/ON
NOTE 1
1.
setting)
Effects Parameters
Description
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reflection diffusion (left–right reflection spread)
Reflection density
High-frequency feedback ratio
Number of early reflections
Feedback gain
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Description
Delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
(Max. value depends on tempo
265
DM2000—Owner's Manual