100
Chapter 11—Matrix Sends
If the Master Layer is currently selected, [SEL] buttons 1–20 can also be used to select Out-
put Channels. Matrix Sends can also be selected by using the MATRIX SELECT [1–4] but-
tons.
Use the Parameter wheel or INC/DEC buttons to set the levels of the Matrix
4
Sends.
5
Use the [ENTER] button to turn on and off the selected Matrix Send.
The various Matrix View page indicators are as follows:
The level in dB and the on/off values of the currently selected Matrix Send are displayed in
the lower-right corner of the page.
Metering Matrix Send Masters
Matrix Send Master levels can be metered on the Meter pages. See "Metering" on page 103
for more information.
Monitoring Matrix Send Masters
Matrix Send Masters can be assigned to the CONTROL ROOM [ASSIGN 1] or [ASSIGN 2]
button for monitoring. See "Control Room Monitoring" on page 132 for more informa-
tion.
Attenuating Matrix Send Masters
Matrix Send Master signals can be attenuated pre-EQ. See "Attenuating Signals" on page
106 for more information.
EQ'ing Matrix Send Masters
Each Matrix Send Master features 4-band parametric EQ. See "Using EQ" on page 107 for
more information.
Grouping Master EQs
Matrix Send Master EQs can be grouped with the EQs of other Output Channels. See
"Grouping Output Channel EQs" on page 110 for more information.
Matrix Send Master Inserts
Internal effects processors and external signal processors can be patched into the Matrix
Send Masters by using the Inserts. See "Using Inserts" on page 111 for more information.
Compressing Matrix Send Masters
Signal dynamics can be controlled by using the Matrix Send Master Compressors. See
"Compressing Channels" on page 113 for more information.
DM2000—Owner's Manual
Send level set to –∞.
Send level bar.
Send set to off.
Send level set to nominal.
Send off, level set to nominal.