Yamaha DM 2000 Owner's Manual page 27

E
ROUTING 1–8 buttons
These buttons are used to route the currently selected Input Channel to the Bus Outs. The
button indicators of Bus Outs to which the Input Channel is routed light up. See "Routing
Input Channels" on page 75 for more information.
PHASE/INSERT
A
PHASE/INSERT DISPLAY button
This button is used to select the Input Channel Phase and Insert pages. See "Reversing the
Signal Phase" on page 68 and "Using Inserts" on page 111 for more information.
B
Phase [ ] button
This button is used to reverse the signal phase of the currently selected Input Channel. Its
indicator lights up when the phase is reversed. See "Reversing the Signal Phase" on page 68
for more information.
C
INSERT ON button
This button is used to turn on and off the Insert of the currently selected channel. Its indi-
cator lights up when the Insert is on. See "Using Inserts" on page 111 for more information.
DELAY
A
DELAY DISPLAY button
This button is used to select the Delay pages. See "Delaying Channel Signals" on page 117
for more information.
B
ON button
This button is used to turn on and off the Delay of the currently selected channel. Its indi-
cator lights up when the Delay function is on. See "Delaying Channel Signals" on page 117
for more information.
C
TIME control
This control is used to set the delay time of the currently selected channel's Delay function.
See "Delaying Channel Signals" on page 117 for more information.
D
FB/MIX indicators
These indicators show whether the FB/MIX control is set to control Feedback Gain or Feed-
back Mix. The FB indicator lights up when it's set to control Feedback Gain; the MIX indi-
cator, when its set to control Feedback Mix. See "Delaying Channel Signals" on page 117 for
more information.
E
FB/MIX control
This is a rotary control and push switch. When the currently selected channel is an Input
Channel, the push switch can be used to select either Feedback Gain (FB) or Feedback Mix
(MIX). The rotary control is used to set the Feedback Gain or Feedback Mix, as selected by
the push switch. See "Delaying Channel Signals" on page 117 for more information.
1 PHASE / INSERT
DISPLAY
INSERT ON
2 3
1
DELAY
FB
DISPLAY
MIX
ON
TIME
2 3 4 5
13
Control Surface
DM2000—Owner's Manual