Yamaha DM 2000 Owner's Manual page 214

200
Chapter 19—Pro Tools Remote Layer
• Press the [POST] button to audition from the out point of the selected region, continuing
for the specified post-roll time.
Auditioning stops at the end of the section, or when a transport button is pressed.
[PRE] & [POST] buttons
These buttons are used to turn on and off pre-roll and post-roll. While the [AUDITION]
button indicator is lit, they are used for auditioning.
[IN] & [OUT] buttons
These buttons are used to set in and out points during playback. While the [AUDITION]
button indicator is lit, they are used for auditioning.
[RETURN TO ZERO] button
Pressing this button moves the playback cursor to the beginning of the session.
[END] button
Pressing this button moves the playback cursor to the end of the session.
[ONLINE] button
This button is used to take Pro Tools online and offline (same as the Online command in
the Operations menu). Its indicator lights up when Pro Tools is online.
[LOOP] button
This button is used to turn loop playback on and off (same as the Loop Playback command
in the Operations menu). Its indicator lights up when loop playback is on. This button is
mutually exclusive with the [QUICK PUNCH], [SHUTTLE], and [SCRUB] buttons.
[QUICK PUNCH] button
This button is used to turn quick punch on and off (same as the Quick Punch command in
the Operations menu). Its indicator lights up when quick punch is on. This button is mutu-
ally exclusive with the [LOOP], [SHUTTLE], and [SCRUB] buttons.
DM2000—Owner's Manual