Yamaha DM 2000 Owner's Manual page 205

Digital production console
Hide thumbs Also See for DM 2000:
Table of Contents

Advertisement

Control Surface Operation with the Pro Tools Remote Layer
INSERT ASSIGN/EDIT
ASSIGN: This indicator works in unison with the EFFECTS/PLUG-INS [5] (ASSIGN)
button indicator. See "Assigning Inserts/Plug-ins" on page 209 for more information.
COMPARE: This indicator works in unison with the EFFECTS/PLUG-INS [6] (COM-
PARE) button indicator. See "Editing Plug-ins" on page 210 for more information.
BYPASS: This indicator works in unison with the EFFECTS/PLUG-INS [7] (BYPASS)
button indicator. See "Editing Plug-ins" on page 210 and "Bypassing Individual Plug-ins"
on page 211 for more information.
INSERT: This indicator works in unison with the EFFECTS/PLUG-INS [8]
(INSERT/PARAM) button indicator. See "Editing Plug-ins" on page 210 for more informa-
tion.
INSERT/PARAM Display
This section displays mainly insert and plug-in-related information, although other mes-
sages are also displayed here.
Encoder Display
This section displays information about the Parameter controls 1–4. The SEL indicators
show the on/off status of the Parameter control push-switches. The rotary control indica-
tors show the positions of the Parameter controls. The "O" symbol below each Parameter
control shows the automation status for each Parameter control.
Channel Strips
DM2000 channel strips correspond to Pro Tools channels from left to right, with
the leftmost Pro Tools channel being handled by DM2000 channel strip #1. You
can change the order of channel strips by dragging the channel select buttons in
Pro Tools, in which case the DM2000 automatically reorders its channel strips.
By using certain USER DEFINED KEYS, Pro Tools channels can be scrolled
AUTO
individually (see page 198), or in banks of 24 (see page 198).
SEL
SOLO
ON
191
DM2000—Owner's Manual

Advertisement

Table of Contents
loading

Table of Contents