Muting Matrix Sends (On/Off); Matrix Send Pages - Yamaha DM 2000 Owner's Manual

98
Chapter 11—Matrix Sends
Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
3
4 Use Encoders 1–20 to set the Matrix Send levels.
Encoders 21–24 are inactive because Matrix Send Masters do not feature Matrix
Send controls.

Muting Matrix Sends (ON/OFF)

1 Press the LAYER [MASTER] button to select the Master Layer.
Use [SEL] buttons 1–20 to select the Bus Outs and Aux Sends, and use the
2
STEREO [SEL] button to select the Stereo Out.
The Matrix Sends for the left and right channels of the Stereo Out can be muted individu-
ally. Use the STEREO [SEL] button to select the left and right channels.
3 Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the
Matrix Sends on the selected Output Channel on and off.

Matrix Send Pages

Matrix Send parameters for the Bus Outs, Aux Sends, and the Stereo Out can be viewed and
set on the Matrix Send page.
1 Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send page.
Use the Matrix SELECT [1–4] buttons to select Matrix Sends 1–4.
2
3 Use the cursor buttons to select the Output Channel Matrix Send controls.
If the Master Layer is selected, [SEL] buttons 1–20 can also be used to select Output Chan-
nels.
4 To turn Matrix Sends on and off, select the rotary controls, and press
[ENTER].
The rotary controls of Matrix Sends that are turned off, appear gray, and "OFF" appears in
place of the level value. Matrix Send levels can still be changed even when Matrix Sends are
off.
To set Matrix Send levels, select the rotary controls, and use the Parameter
5
wheel or INC/DEC buttons.
DM2000—Owner's Manual
AUX / MATRIX SEND
DISPLAY
LEVEL LEVEL
BANK ON ON
1 1 2
AUX / MATRIX AUX / MATRIX
5 6
AUX AUX
9 10
AUX AUX
LEVEL LEVEL
ON ON
2 3 3 4 4
AUX / MATRIX AUX / MATRIX
7 8
AUX AUX
11 12
AUX AUX